EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultimate Capacity of Subsea CO2 Transport Pipelines with Semi-Elliptical Corrosion Defects under Combined Internal Pressure and Bending Moment: A Finite Element Study

Aprianur Fajri, Aditya Rio Prabowo, Ristiyanto Adiputra, Nurul Muhayat, Iwan Istanto, Dominicus Danardono Dwi Prija Tjahjana, Quang Thang Do, Nguyen Thanh Phuong, Oleksiy Melnyk

Future Cities and Environment · 28.08.2026 · 12 · 17

DOI: 10.70917/fce-2026-020 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Future Cities and Environment, online erschienen am 28.08.2026. Verfasst von Aprianur Fajri und 8 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the ultimate bending capacity of API 5L X52 subsea CO2 transport pipelines as part of environmentally sound technology within Sustainable Development Goal (SDG) 17, incorporating idealized semi-elliptical corrosion defects under combined internal pressure and bending moment. A nonlinear finite element model was benchmarked against published four-point bending tests on corroded pipes with rectangular defects for validation purposes. The validated modeling procedure was then applied to a deterministic parametric study involving 33 selected cases, with corrosion depth ratios of = 0.1 – 0.8, defect length ratios of = 0.2 – 1.2, and internal pressures ranging from 0 to 20 MPa. The results show that corrosion depth is the primary parameter controlling bending-capacity degradation because it reduces the residual wall thickness, local section stiffness, and shell stability at the remaining ligament. Increasing defect length reduces the bending capacity up to a saturation region, after which the response is mainly governed by the weakest local cross-section. For the investigated semi-elliptical defect configuration, internal pressure reduces the ultimate bending capacity rather than improving it. The pressure-induced circumferential stress interacts with the bending-induced axial stress, promoting earlier yielding and local buckling at the corroded ligament. The normalized ultimate bending capacity at and decreased from 0.95 to 0.86 as the pressure increased from 0 to 20 MPa. These findings indicate that the residual bending capacity of corroded CO2 pipelines should be assessed by considering the coupled effects of metal-loss geometry, pressure-induced membrane stress, and local shell instability. The results are deterministic estimates and are limited to the investigated pipe geometry, idealized single-defect morphology, material model, and loading range. The benchmark validation supports the FE framework but does not directly validate the semi-elliptical defect morphology.

Zitieren

APA

Fajri, A., Prabowo, A. R., Adiputra, R., Muhayat, N., Istanto, I., Tjahjana, D. D. D. P., Do, Q. T., Phuong, N. T., & Melnyk, O. (2026). Ultimate Capacity of Subsea CO2 Transport Pipelines with Semi-Elliptical Corrosion Defects under Combined Internal Pressure and Bending Moment: A Finite Element Study. Future Cities and Environment, 12, 17. https://doi.org/10.70917/fce-2026-020

Vancouver

Fajri A, Prabowo AR, Adiputra R, Muhayat N, Istanto I, Tjahjana DDDP, et al. Ultimate Capacity of Subsea CO2 Transport Pipelines with Semi-Elliptical Corrosion Defects under Combined Internal Pressure and Bending Moment: A Finite Element Study. Future Cities and Environment. 2026;12:17. doi:10.70917/fce-2026-020

BibTeX
@article{Fajri2026,
  author = {Fajri, Aprianur and Prabowo, Aditya Rio and Adiputra, Ristiyanto and Muhayat, Nurul and Istanto, Iwan and Tjahjana, Dominicus Danardono Dwi Prija and Do, Quang Thang and Phuong, Nguyen Thanh and Melnyk, Oleksiy},
  title = {Ultimate Capacity of Subsea CO2 Transport Pipelines with Semi-Elliptical Corrosion Defects under Combined Internal Pressure and Bending Moment: A Finite Element Study},
  journal = {Future Cities and Environment},
  year = {2026},
  volume = {12},
  pages = {17},
  doi = {10.70917/fce-2026-020}
}
Kostenlos starten →