EUVIMEDEUVIMED entdecken
Crossref

Role of ethyl acetate concentration and needle size in tailoring electrospun nanofiber structure

Sümran Bilgin, Sefa Emre Sünbül, Kürşat İcin

The International Journal of Materials and Engineering Technology · 30.06.2025 · 8 (1) · 36-40

DOI: 10.70858/tijmet.1657368 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Materials and Engineering Technology, online erschienen am 30.06.2025. Verfasst von Sümran Bilgin und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the impact of ethyl acetate addition on the morphology and diameter of nanofibers during electrospinning. Solutions containing polyacrylonitrile, high-entropy oxide, and dimethylformamide (DMF) were prepared, with ethyl acetate added at 5%, 10%, and 15% ratios relative to DMF. Electrospinning was performed under a 0.14 mL/h feed rate, 6 kV voltage, 205 mm distance, and 500 rpm rotation speed. Continuous and uniform nanofibers were obtained using 10% ethyl acetate, with diameters as low as 110 nm. At 15%, morphology was disrupted due to decreased viscosity, while 5% and 10% ratios yielded thinner, more homogeneous fibers. A solution with 5% PAN, 35% high-entropy oxide, and 10% ethyl acetate was electrospun using 16G and 22G nozzles, resulting in fibers with diameters of 182 nm and 111 nm, respectively. SEM analysis confirmed diameter differences, while XRD showed no significant structural changes with varying ethyl acetate content. FTIR spectra revealed characteristic peaks of high-entropy oxides, indicating the successful incorporation of these oxides into the nanofibers.

Zitieren

APA

Bilgin, S., Sünbül, S. E., & İcin, K. (2025). Role of ethyl acetate concentration and needle size in tailoring electrospun nanofiber structure. The International Journal of Materials and Engineering Technology, 8(1), 36-40. https://doi.org/10.70858/tijmet.1657368

Vancouver

Bilgin S, Sünbül SE, İcin K. Role of ethyl acetate concentration and needle size in tailoring electrospun nanofiber structure. The International Journal of Materials and Engineering Technology. 2025;8(1):36-40. doi:10.70858/tijmet.1657368

BibTeX
@article{Bilgin2025,
  author = {Bilgin, Sümran and Sünbül, Sefa Emre and İcin, Kürşat},
  title = {Role of ethyl acetate concentration and needle size in tailoring electrospun nanofiber structure},
  journal = {The International Journal of Materials and Engineering Technology},
  year = {2025},
  volume = {8},
  number = {1},
  pages = {36--40},
  doi = {10.70858/tijmet.1657368}
}
Kostenlos starten →