EUVIMEDEUVIMED entdecken
Crossref

Canada/US (CANUS) Comparison of Out-of-Plane Reinforced Masonry Wall Design Provisions

Heather Sustersic, David Stubbs, Russ Peterson, Richard M. Bennett, Clayton Pettit, Bart Flisak, Ece Erdogmus, Jason Thompson, Semsi Coskun, Bennett Banting, Carlos Cruz-Noguez

The Masonry Society Journal · 2024

DOI: 10.70803/001c.136442 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Masonry Society Journal, 2024. Verfasst von Heather Sustersic und 10 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As part of a larger project jointly sponsored by the National Concrete Masonry Association (NCMA) Foundation, Canadian Concrete Masonry Producers Association (CCMPA), Canada Masonry Design Centre (CMDC) and Canadian Standards Association (CSA), a team of engineers and researchers from U.S. and Canada worked together to examine the key differences and similarities between the design provisions for reinforced masonry walls subject to out-of-plane (OOP) and axial loads. The scope was limited to the strength design provisions of TMS 402-16 and the limit state design provisions of CSA S304-14 masonry design standards. Several parametric studies were conducted to quantify the comparisons, as well as to identify possible limitations within each code. These studies explored factors that directly impact the calculation of combined flexural and axial capacity, wall stiffness, second-order moments, and shear capacity of the masonry walls subjected to OOP loading. Parameters considered include the compressive strength of the masonry assembly, wall geometry, as well as the size, strength and spacing of the steel reinforcement. In general, it was found that the Canadian provisions are more conservative than those in the U.S. The paper also provides a list of areas of further research or code revisions that should be considered in the future. It is the team’s goal to propose improvements to both codes as a result of this work.

Zitieren

APA

Sustersic, H., Stubbs, D., Peterson, R., Bennett, R. M., Pettit, C., Flisak, B., Erdogmus, E., Thompson, J., Coskun, S., Banting, B., & Cruz-Noguez, C. (2024). Canada/US (CANUS) Comparison of Out-of-Plane Reinforced Masonry Wall Design Provisions. The Masonry Society Journal. https://doi.org/10.70803/001c.136442

Vancouver

Sustersic H, Stubbs D, Peterson R, Bennett RM, Pettit C, Flisak B, et al. Canada/US (CANUS) Comparison of Out-of-Plane Reinforced Masonry Wall Design Provisions. The Masonry Society Journal. 2024. doi:10.70803/001c.136442

BibTeX
@article{Sustersic2024,
  author = {Sustersic, Heather and Stubbs, David and Peterson, Russ and Bennett, Richard M. and Pettit, Clayton and Flisak, Bart and Erdogmus, Ece and Thompson, Jason and Coskun, Semsi and Banting, Bennett and Cruz-Noguez, Carlos},
  title = {Canada/US (CANUS) Comparison of Out-of-Plane Reinforced Masonry Wall Design Provisions},
  journal = {The Masonry Society Journal},
  year = {2024},
  doi = {10.70803/001c.136442}
}
Kostenlos starten →