EUVIMEDEUVIMED entdecken
Crossref

Canada/US (CANUS) Comparison of Reinforced Masonry Design: Project Overview and Design Examples

Ece Erdogmus, Jason Thompson, Bennett Banting, Helene Dutrisac, Philippe Ledent, Kevin Hughes, Bart Flisak

The Masonry Society Journal · 2024

DOI: 10.70803/001c.136440 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Masonry Society Journal, 2024. Verfasst von Ece Erdogmus und 6 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work is the first one of the four companion papers associated with the Canada/US (CANUS) collaborative project: Harmonization of Canadian and American Masonry Structures Design Standards. This paper provides an overview of the key differences in reinforced concrete masonry design provisions between the two countries. The first part of the paper summarizes these differences in a discussion format, while the second part provides two design examples: a two story mixed-use occupancy building and a multi-story residential building. Two locations are selected for high and low seismicity. While the critique of the building codes is out of the scope of this study, when appropriate, differences regarding the loading considerations from NBCC 2015 and ASCE 7-16 are highlighted. In some cases, the corresponding design checks align closely between the two countries’ design standards, while in other cases there are minor to significant differences. There are also instances where one of the standards is silent on a topic while the other addresses it comprehensively. In general, it is observed that TMS 402-16 allows a larger applicability of masonry design compared to CSA S304-14 due to the compounding effect of lower trust in masonry’s material strength and stricter considerations in design equations.

Zitieren

APA

Erdogmus, E., Thompson, J., Banting, B., Dutrisac, H., Ledent, P., Hughes, K., & Flisak, B. (2024). Canada/US (CANUS) Comparison of Reinforced Masonry Design: Project Overview and Design Examples. The Masonry Society Journal. https://doi.org/10.70803/001c.136440

Vancouver

Erdogmus E, Thompson J, Banting B, Dutrisac H, Ledent P, Hughes K, et al. Canada/US (CANUS) Comparison of Reinforced Masonry Design: Project Overview and Design Examples. The Masonry Society Journal. 2024. doi:10.70803/001c.136440

BibTeX
@article{Erdogmus2024,
  author = {Erdogmus, Ece and Thompson, Jason and Banting, Bennett and Dutrisac, Helene and Ledent, Philippe and Hughes, Kevin and Flisak, Bart},
  title = {Canada/US (CANUS) Comparison of Reinforced Masonry Design: Project Overview and Design Examples},
  journal = {The Masonry Society Journal},
  year = {2024},
  doi = {10.70803/001c.136440}
}
Kostenlos starten →