EUVIMEDEUVIMED entdecken
Crossref

Development and Evaluation of Hollow Concrete Interlocking Block Masonry System

K.B. Anand, K. Ramamurthy

The Masonry Society Journal · 2005

DOI: 10.70803/001c.130934 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Masonry Society Journal, 2005. Verfasst von K.B. Anand und 1 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Traditional masonry construction can be labor intensive and slow due to use of small-sized bricks, which also requires the use of numerous mortar joints. Desire to increase the speed of masonry construction prompted investigations that led to the development of surface bonded and mortarless masonry using conventional and interlocking blocks. Among these methods, the construction technique adopting interlocking blocks has recently attracted worldwide interest. The geometric features of the individual blocks facilitate interlocking in horizontal and/or vertical directions. This method has significant potential for field adoption due of its inherent advantages such as simplicity in block laying, reduction in mortar consumption and general independence of workmanship variations. Increased output is reported to result in a labor cost reduction of up to 80% [Hines (1993)]. Most of the available interlocking blocks vary in geometry, material and dimensional characteristics, and are proprietary systems. Systems can be categorized as those that ensure two-way (vertical and horizontal) interlocking or those that provide only one-way (vertical) interlocking. Many of the developed systems did not progress beyond the design stage because of their intricate configurations [Crofts (1993)]. Although a number of interlocking block systems have been reported in the literature, test results on behavioral characteristics are available only for a few of these systems. Classification and a consolidated review of existing systems of interlocking block masonry have been made by Ramamurthy and Nambiar (2004). Solid or nearly solid systems like Ytong block [Sahlin (1971) Oh (1994)], the TASTA system, Jasma (1991), the Sparfill system [Gazzola (1989)], and the SILBLOCK system [Anand and Ramamurthy (2000)] have the limitation that they cannot be adapted to seismic applications. Some of the systems that enable reinforcing and have been recommended for adoption in earthquake resistant construction are Mecano system [Gallegos (1988)], the Haener system, [Drysdale and Gazzola (1991)], the Modified H-block system [Harris (1992) and Hamid, Harris, and Oh (1993)], the WHD block system [Harris (1992) and Hamid, Harris, and Oh (1993)], Azar block [Technical brochure 1998)], Faswall system and the IMSI system [Vander Werf (1999)].

Zitieren

APA

Anand, K., & Ramamurthy, K. (2005). Development and Evaluation of Hollow Concrete Interlocking Block Masonry System. The Masonry Society Journal. https://doi.org/10.70803/001c.130934

Vancouver

Anand K, Ramamurthy K. Development and Evaluation of Hollow Concrete Interlocking Block Masonry System. The Masonry Society Journal. 2005. doi:10.70803/001c.130934

BibTeX
@article{Anand2005,
  author = {Anand, K.B. and Ramamurthy, K.},
  title = {Development and Evaluation of Hollow Concrete Interlocking Block Masonry System},
  journal = {The Masonry Society Journal},
  year = {2005},
  doi = {10.70803/001c.130934}
}
Kostenlos starten →