EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In-situ Rotary Cutting System for Estimating the Mechanical Parameters of Rock Masses

Liang He

Rock Mechanics Letters · 2024

DOI: 10.70425/rml.202401.3 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Rock Mechanics Letters, 2024. Verfasst von Liang He. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A rock mass in-situ rotary cutting test system (RMIRCS) was developed to estimate the mechanical properties (i.e. compressive strength and elastic modulus) of rock masses. The pressure-on-bit and torque-on-bit of the RMIRCS were investigated in detail over a wide range of revolution speed and penetration rate. A simple experimental model is proposed to describe the qualitative relationships between rotary cutting test data and mechanical parameters. The existence of a linear constraint between pressure-on-bit and torque-on-bit and the depth of rotary cutting exhibits good agreement with the proposed model. The mechanical properties obtained from the quasi-static compression tests were in agreement with those of the RMIRCS at lower revolutions rate of 300 rpm and 350 rpm, which suggests that the developed RMIRCS is valid. Furthermore, the experimental test results on rock mass demonstrated that the mechanical properties of rock masses are revolutions speed-dependent and drilling rate-dependent.

Zitieren

APA

He, L. (2024). In-situ Rotary Cutting System for Estimating the Mechanical Parameters of Rock Masses. Rock Mechanics Letters. https://doi.org/10.70425/rml.202401.3

Vancouver

He L. In-situ Rotary Cutting System for Estimating the Mechanical Parameters of Rock Masses. Rock Mechanics Letters. 2024. doi:10.70425/rml.202401.3

BibTeX
@article{He2024,
  author = {He, Liang},
  title = {In-situ Rotary Cutting System for Estimating the Mechanical Parameters of Rock Masses},
  journal = {Rock Mechanics Letters},
  year = {2024},
  doi = {10.70425/rml.202401.3}
}
Kostenlos starten →