Simultaneously improving thermal conductivities and mechanical strength of carbon fibers/epoxy composites via CNT/copolymer hybrid interphase
Thermo-X · 2026
DOI: 10.70401/tx.2026.0023 ↗Kurz gefasst
Fachartikel in der Zeitschrift Thermo-X, 2026. Verfasst von Yuhan Lin und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
Carbon fibers (CF)/epoxy composites are widely utilized in aerospace and transportation due to their light weight and high specific strength/modulus. However, poor interfacial binding between CF and the epoxy matrix leads to phonon scattering and inefficient load transfer, causing heat accumulation and reduced service life in high-power electronic systems. In this study, CF was coated with a styrene, benzocyclobutene, and methyl methacrylate units containing polymer layer mixed with carbon nanotubes (CNT) through impregnation and drying. The polymer layer was then thermally crosslinked to obtain the polymer and CNT coated CF (CF@(CNT/P)). CF@(CNT/P) was then applied as reinforced fibers and epoxy resin containing a liquid crystal structure as the matrix to prepare CF@(CNT/P)/epoxy composites. The π-π interactions and hydrogen bonds between CF and epoxy resin were enhanced by the benzene ring and ester groups in the polymer, thereby improving the interfacial binding between epoxy resin and CF. CF@(CNT/P)/epoxy composite showed enhanced load-bearing and thermal conduction performance. When the mass fractions of CNT and copolymer in CNT/P/dichloromethane (DCM) solution were 0.03 wt% and 0.1 wt%, respectively, the CF@(CNT/P) had the best interfacial binding to the epoxy resin. The interlaminar shear strength and flexural strength of the CF@(CNT/P)/epoxy composite increased from 23.7 and 252.5 MPa of CF/epoxy composite to 31.4 and 369.1 MPa, respectively. Meanwhile, the in-plane (λ∥) and through-plane (λ⊥) thermal conductivity values were improved from 7.15 and 0.31 W/(m·K) of CF/epoxy composite to 10.08 and 0.58 W/(m·K), respectively. The CF@(CNT/P)/epoxy composite also demonstrated an electromagnetic interference shielding effectiveness of 38.6 dB which has broad application in high-power electronic information systems.
Zitieren
APA
Lin, Y., Zhang, W., Guo, H., Liu, J., Zhang, J., Guo, Y., & Gu, J. (2026). Simultaneously improving thermal conductivities and mechanical strength of carbon fibers/epoxy composites via CNT/copolymer hybrid interphase. Thermo-X. https://doi.org/10.70401/tx.2026.0023
Vancouver
Lin Y, Zhang W, Guo H, Liu J, Zhang J, Guo Y, et al. Simultaneously improving thermal conductivities and mechanical strength of carbon fibers/epoxy composites via CNT/copolymer hybrid interphase. Thermo-X. 2026. doi:10.70401/tx.2026.0023
BibTeX
@article{Lin2026,
author = {Lin, Yuhan and Zhang, Wenqing and Guo, Hua and Liu, Jiawen and Zhang, Junliang and Guo, Yongqiang and Gu, Junwei},
title = {Simultaneously improving thermal conductivities and mechanical strength of carbon fibers/epoxy composites via CNT/copolymer hybrid interphase},
journal = {Thermo-X},
year = {2026},
doi = {10.70401/tx.2026.0023}
}
EUVIMED