Poly(ionic liquid) thermal gels enabling compliant and adhesive interfaces for chip-scale thermal management
Thermo-X · 2025
DOI: 10.70401/tx.2026.0011 ↗Kurz gefasst
Fachartikel in der Zeitschrift Thermo-X, 2025. Verfasst von Jianhui Zeng und 7 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
The increasing die size, package dimensions and operating heat flux of AI chips impose stringent requirements on the mechanical compliance and reliability of chip-level thermal interface materials (TIMs). Polymer-based TIMs, particularly silicone gels, offer advantages such as mechanical flexibility, automated dispensability, and warpage accommodation in large packages; however, their application is limited by weak interfacial adhesion and siloxane volatilization. Therefore, it is essential to develop advanced non-silicone thermal gels. This study reports a poly(ionic liquid) (PIL)-based thermally gel TIM. The TIM was fabricated by dispensing a mixture of ionic liquid monomer, Al2O3 thermal filler, and initiator, followed by thermal curing, making it compatible with FCBGA dispensing processes (the viscosity before curing was 225 Pa·s). With 70 vol% Al2O3 filler, the PIL-based TIM exhibited a low storage modulus of 255 kPa and high interfacial adhesion strengths of 0.95 MPa to Cu and 0.91 MPa to Si. The intrinsic thermal resistance reached 2.4 × 10-5 m2·K/W, comparable to that of conventional silicone systems. Notably, the interfacial contact thermal resistance with Si (Rc = 1.95 ± 0.87 × 10-7 m2·K/W) was an order of magnitude lower than that of silicone-based TIMs. Reliability tests showed > 98% coverage after three accelerated aging tests, with no leakage or volatilization. The proof-of-concept study validates the feasibility of PIL-based TIMs and highlights their significant potential for further optimization in next-generation AI thermal management.
Zitieren
APA
Zeng, J., Rao, T., Shi, H., Guo, Y., Peng, Z., Li, L., Sun, R., & Yao, Y. (2025). Poly(ionic liquid) thermal gels enabling compliant and adhesive interfaces for chip-scale thermal management. Thermo-X. https://doi.org/10.70401/tx.2026.0011
Vancouver
Zeng J, Rao T, Shi H, Guo Y, Peng Z, Li L, et al. Poly(ionic liquid) thermal gels enabling compliant and adhesive interfaces for chip-scale thermal management. Thermo-X. 2025. doi:10.70401/tx.2026.0011
BibTeX
@article{Zeng2025,
author = {Zeng, Jianhui and Rao, Taoying and Shi, Hang and Guo, Yilan and Peng, Zhengwu and Li, Liejun and Sun, Rong and Yao, Yimin},
title = {Poly(ionic liquid) thermal gels enabling compliant and adhesive interfaces for chip-scale thermal management},
journal = {Thermo-X},
year = {2025},
doi = {10.70401/tx.2026.0011}
}
EUVIMED