EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on mechanical properties and mix ratio optimization of granulated blast furnace slag based composite materials for solidifying inorganic softened sludge from power plants

Chaoyi Ma, Chao Liu, Chao Zhu, Xin Guo, Yifei Wang, Wenxuan Zhu, Huawei Liu

Journal of Building Design and Environment · 04.03.2026

DOI: 10.70401/jbde.2026.0032 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Building Design and Environment, online erschienen am 04.03.2026. Verfasst von Chaoyi Ma und 6 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses the challenges of solidifying high-moisture, high-alkalinity inorganic softening sludge (ISS) by utilizing alkali-activated slag-based cementitious materials. The research investigated strength evolution via unconfined compressive strength tests, while X-ray diffraction and scanning electron microscopy were employed to analyze phase composition and microstructural changes. Furthermore, response surface methodology was utilized to optimize mix proportions and explore interaction mechanisms. Results indicate that granulated blast furnace slag is the primary strength contributor, whereas fly ash and sodium silicate exhibit nonlinear effects. Microscopic analysis reveals that changes in raw material ratios influence strength development by regulating the formation of products such as calcium aluminosilicate hydrate (C-A-S-H) and sodium aluminosilicate hydrate (N-A-S-H). Optimization results from response surface methodology show that, when sodium hydroxide dosage is fixed at 2.5%, the optimal dosages for granulated blast furnace slag, fly ash, and sodium silicate are 30.65%, 29.98%, and 6.96%, respectively, achieving a 7-day unconfined compressive strength of 5.38 MPa. Furthermore, significant interactions exist between granulated blast furnace slag and fly ash, as well as between fly ash and sodium silicate. This study provides a theoretical basis for the resource utilization of ISS in road base materials.

Zitieren

APA

Ma, C., Liu, C., Zhu, C., Guo, X., Wang, Y., Zhu, W., & Liu, H. (2026). Study on mechanical properties and mix ratio optimization of granulated blast furnace slag based composite materials for solidifying inorganic softened sludge from power plants. Journal of Building Design and Environment. https://doi.org/10.70401/jbde.2026.0032

Vancouver

Ma C, Liu C, Zhu C, Guo X, Wang Y, Zhu W, et al. Study on mechanical properties and mix ratio optimization of granulated blast furnace slag based composite materials for solidifying inorganic softened sludge from power plants. Journal of Building Design and Environment. 2026. doi:10.70401/jbde.2026.0032

BibTeX
@article{Ma2026,
  author = {Ma, Chaoyi and Liu, Chao and Zhu, Chao and Guo, Xin and Wang, Yifei and Zhu, Wenxuan and Liu, Huawei},
  title = {Study on mechanical properties and mix ratio optimization of granulated blast furnace slag based composite materials for solidifying inorganic softened sludge from power plants},
  journal = {Journal of Building Design and Environment},
  year = {2026},
  doi = {10.70401/jbde.2026.0032}
}
Kostenlos starten →