EUVIMEDEUVIMED entdecken
StudienprotokollOpen Access · CC BY 4.0

Rheological rejuvenation and structural build-up of 3D printed manufactured sand concrete via secondary mixing protocol

Wenxuan Zhu, Chao Liu, Yu Zhang, Chao Zhu, Tilin Wang, Yifei Wang, Huawei Liu

Journal of Building Design and Environment · 10.02.2026

DOI: 10.70401/jbde.2026.0029 ↗

Kurz gefasst

Studienprotokoll in der Zeitschrift Journal of Building Design and Environment, online erschienen am 10.02.2026. Verfasst von Wenxuan Zhu und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The application of sustainable manufactured sand (MS) in 3D printed concrete is currently severely restricted by the “pumpability-buildability” conflict, primarily characterized by the high internal friction and angularity of MS particles. To overcome this bottleneck, this study proposes a novel process-oriented strategy: a secondary mixing protocol featuring a static resting period and delayed superplasticizer addition. This approach is explicitly designed to induce a “rheological rejuvenation” effect in stiff MS mixtures. Quantitative results demonstrate that this protocol reduces the static yield stress of high-volume MS ink (T-3) by approximately 39% (from 1,516 Pa to 924 Pa) and significantly diminishes thixotropic hysteresis, thereby successfully reopening the effective printing window to approximately 65 min. Although increasing MS content accelerates the structural build-up rate, the optimized 3D printed manufactured sand concrete (T-3) achieves a 28-day compressive strength of 61 MPa, representing a 15% enhancement over the river sand reference group (T-0). These findings confirm that the secondary mixing protocol is a robust solution capable of unlocking the potential of high-volume MS in sustainable digital construction.

Zitieren

APA

Zhu, W., Liu, C., Zhang, Y., Zhu, C., Wang, T., Wang, Y., & Liu, H. (2026). Rheological rejuvenation and structural build-up of 3D printed manufactured sand concrete via secondary mixing protocol. Journal of Building Design and Environment. https://doi.org/10.70401/jbde.2026.0029

Vancouver

Zhu W, Liu C, Zhang Y, Zhu C, Wang T, Wang Y, et al. Rheological rejuvenation and structural build-up of 3D printed manufactured sand concrete via secondary mixing protocol. Journal of Building Design and Environment. 2026. doi:10.70401/jbde.2026.0029

BibTeX
@article{Zhu2026,
  author = {Zhu, Wenxuan and Liu, Chao and Zhang, Yu and Zhu, Chao and Wang, Tilin and Wang, Yifei and Liu, Huawei},
  title = {Rheological rejuvenation and structural build-up of 3D printed manufactured sand concrete via secondary mixing protocol},
  journal = {Journal of Building Design and Environment},
  year = {2026},
  doi = {10.70401/jbde.2026.0029}
}
Kostenlos starten →