EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

MINERALOGICAL CHARACTERIZATION OF ISUA CLAY FOR HIGH TEMPERATURE APPLICATIONS

OLUSOLA, EMMANUEL OMOWUMI

Journal of Engineering Research and Development · 2025

DOI: 10.70382/bejerd.v7i5.005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering Research and Development, 2025. Verfasst von OLUSOLA und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mineralogical, chemical, and thermal properties of Isua clay to determine its suitability for high-temperature applications, including ceramics and refractory materials. X-ray diffraction (XRD) analysis identified kaolinite (Al₂ Si₂ O₅ (OH)₄) as the primary mineral phase, with secondary constituents such as quartz (SiO₂), feldspar (KAlSi₃O₈), hematite (Fe₂O₃), and anatase (TiO₂). X-ray fluorescence (XRF) analysis confirmed a high SiO₂ (51.3%) and Al₂O₃ (24.7%) content, which contributes to thermal stability and mechanical strength. The thermogravimetric (TGA) and differential thermal analysis (DTA) revealed that kaolinite undergoes dehydroxylation at ~550°C, followed by mullite formation at ~980°C, indicating moderate-to-high refractory potential. The pyrometric cone equivalent (PCE) test showed a softening temperature of 1540°C, classifying the clay as a moderate refractory material. With a bulk density of 2.3 g/cm³ and a linear shrinkage of 8.5% at 1300°C, Isua clay exhibits good dimensional stability and thermal resistance. These properties make it suitable for firebricks, refractory linings, foundry molds, and structural ceramics. However, its Fe₂O₃ content (6.1%) may require further processing for applications demanding high whiteness. The findings suggest that Isua clay is a promising raw material for industrial high-temperature applications, with potential improvements achievable through blending with high-alumina clays.

Zitieren

APA

OLUSOLA, & OMOWUMI, E. (2025). MINERALOGICAL CHARACTERIZATION OF ISUA CLAY FOR HIGH TEMPERATURE APPLICATIONS. Journal of Engineering Research and Development. https://doi.org/10.70382/bejerd.v7i5.005

Vancouver

OLUSOLA, OMOWUMI E. MINERALOGICAL CHARACTERIZATION OF ISUA CLAY FOR HIGH TEMPERATURE APPLICATIONS. Journal of Engineering Research and Development. 2025. doi:10.70382/bejerd.v7i5.005

BibTeX
@article{OLUSOLA2025,
  author = {OLUSOLA and OMOWUMI, EMMANUEL},
  title = {MINERALOGICAL CHARACTERIZATION OF ISUA CLAY FOR HIGH TEMPERATURE APPLICATIONS},
  journal = {Journal of Engineering Research and Development},
  year = {2025},
  doi = {10.70382/bejerd.v7i5.005}
}
Kostenlos starten →