EUVIMEDEUVIMED entdecken
Crossref

Steel and Aluminium Moulds: Comparative Analysis of Optimal Parameters to Inject Amorphous and Semicrystalline Polymers

Pedro G. C. S. Marconi, Evandro M. S. Amarante, Rosana L. L. Fialho, Cristiano V. Ferreira, Valter E. Beal, Armando S. R. J鷑ior

Advanced Materials & Sustainable Manufacturing · 2025

DOI: 10.70322/amsm.2025.10006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials & Sustainable Manufacturing, 2025. Verfasst von Pedro G. C. S. Marconi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The thermoplastic injection moulding process is very important in the plastics industry, as it enables automated production, supports high productivity and allows the production of plastic parts with complex geometries. It is possible to split in two large groups of polymers: amorphous and semicrystalline. Cooling rate and other injection moulding parameters have great influence over the final properties of the plastic part. Regarding the use of aluminium as cavity material in injection moulds, new variables must be included in the analysis, since its thermal properties are significantly different from those presented by steels, which are traditionally used. In this way, the purpose of this study was to evaluate the effect of aluminium and steel cavities on different types of thermoplastics belonging to the two classes of polymers by assessing the injection parameters of a high-production part (automotive cup holder). In terms of productivity factors, moulds made of aluminium using semicrystalline polymers showed more significant reductions in cycle time compared to amorphous materials. Specifically, polypropylene exhibited a cycle time reduction between 40.6% and 52.5% when compared to steel moulds, while polyamide showed an even more substantial reduction, ranging between 56% and 63.5%. As for warpage, the amorphous materials displayed the lowest values for both types of moulds, but they also exhibited greater variations in isothermal simulations compared to semicrystalline materials. In relation to the mould materials, aluminium mould exhibited the lowest warping results and smaller variations compared to the isothermal analyses for all polymers.

Zitieren

APA

Marconi, P. G. C. S., Amarante, E. M. S., Fialho, R. L. L., Ferreira, C. V., Beal, V. E., & J鷑ior, A. S. R. (2025). Steel and Aluminium Moulds: Comparative Analysis of Optimal Parameters to Inject Amorphous and Semicrystalline Polymers. Advanced Materials & Sustainable Manufacturing. https://doi.org/10.70322/amsm.2025.10006

Vancouver

Marconi PGCS, Amarante EMS, Fialho RLL, Ferreira CV, Beal VE, J鷑ior ASR. Steel and Aluminium Moulds: Comparative Analysis of Optimal Parameters to Inject Amorphous and Semicrystalline Polymers. Advanced Materials & Sustainable Manufacturing. 2025. doi:10.70322/amsm.2025.10006

BibTeX
@article{Marconi2025,
  author = {Marconi, Pedro G. C. S. and Amarante, Evandro M. S. and Fialho, Rosana L. L. and Ferreira, Cristiano V. and Beal, Valter E. and J鷑ior, Armando S. R.},
  title = {Steel and Aluminium Moulds: Comparative Analysis of Optimal Parameters to Inject Amorphous and Semicrystalline Polymers},
  journal = {Advanced Materials & Sustainable Manufacturing},
  year = {2025},
  doi = {10.70322/amsm.2025.10006}
}
Kostenlos starten →