EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Experimental Study on Hydraulic Jumps over Rough and Sloped Beds

Tanjun Ashravi Ridoy, Md. Saniul Haque Mahi

Smart and Green Materials · 2025

DOI: 10.70028/sgm.v2i2.63 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart and Green Materials, 2025. Verfasst von Tanjun Ashravi Ridoy und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydraulic jumps are also a fundamental process of energy dissipation in open-channel systems, but their nature of operation is very sensitive to the effects of the boundary conditions, such as the inclination of a channel and its roughness. Even though the effect of slope and roughness separately has been well studied, the interaction between the two has not been well outlined, particularly in high-Froude-number regimes. This study experimentally investigates how slope direction and bed roughness interact to control sequent depth ratio (y₂/y₁) and energy dissipation in hydraulic jumps over a Froude number range of approximately 5–10. Experiments were conducted in a 3.66-m glass flume with adjustable slopes (±1°, ±2°, ±2.5°) and two bed conditions: smooth and rough, the latter formed using angular stone chips representing a hydraulically rough regime. The depth of upstream and downstream flow discharge, as well as specific energy, was measured by calibrated ultrasonic sensors and flow meters, and each experiment was repeated to ensure the statistical strength. The findings reveal a strong asymmetry in the behavior of hydraulic jump. Positive slopes, which increase the force of action of gravity, produced even greater sequent depths and even reduced energy losses; smooth beds increased this tendency, and the greatest depth increments downstream were gained. On the other hand, negative slopes significantly reduced y₂/y₁ and dramatically increased energy dissipation, which was most pronounced on the rough beds because of the increased turbulence and resistance to flow. Within the sum of the conditions, smooth beds always yielded better sequent depths, but rough beds allowed dissipation to take place. The results add new empirical evidence on the slope roughness interaction and provide practical advice on hydraulic engineering: smooth, positive slope can be used in channels that require constant depth, and rough, adverse slope can be used best in stilling basins, spillway aprons, and other high-energy dissipation structures.

Zitieren

APA

Ridoy, T. A., & Mahi, M. S. H. (2025). Experimental Study on Hydraulic Jumps over Rough and Sloped Beds. Smart and Green Materials. https://doi.org/10.70028/sgm.v2i2.63

Vancouver

Ridoy TA, Mahi MSH. Experimental Study on Hydraulic Jumps over Rough and Sloped Beds. Smart and Green Materials. 2025. doi:10.70028/sgm.v2i2.63

BibTeX
@article{Ridoy2025,
  author = {Ridoy, Tanjun Ashravi and Mahi, Md. Saniul Haque},
  title = {Experimental Study on Hydraulic Jumps over Rough and Sloped Beds},
  journal = {Smart and Green Materials},
  year = {2025},
  doi = {10.70028/sgm.v2i2.63}
}
Kostenlos starten →