EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effects of Using Natural Fibers on the Fresh and Mechanical Properties of Concrete: A Comprehensive Review

Sardam Salam Shkur, Azad Abdwlqadir Mohammed, Soran Abdrahman Ahmad, HERSH F Mahmood

Smart and Green Materials · 2025

DOI: 10.70028/sgm.v2i2.47 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Smart and Green Materials, 2025. Verfasst von Sardam Salam Shkur und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Most of the materials used in the construction sector are concrete, which has some disadvantages and weaknesses, such as low ductility and tensile strength. Many studies have been conducted to improve these properties, including the use of natural fibers. This article reviews previous experimental work on the use of different types of natural fibers in concrete at varying rates, highlighting their effects on both the fresh and mechanical properties of concrete. Based on the reviewed experimental data, relationships between concrete properties and the rate of fiber usage have been established. The effect of natural fibers on the slump value varies depending on the water absorption ability of the fibers. The slump decreases as the rate of natural fiber usage increases. The effect of natural fibers on compressive strength depends on fiber length and the water absorption ability of the fibers. As fiber length increases, the voids in the concrete increase, leading to a decrease in compressive strength. The effect of natural fibers on the flexural strength of concrete is influenced by fiber length and the elongation ability of the fibers. In terms of tensile strength, it was found that using sisal fiber in concrete at 0.5% increases the tensile strength by up to 30% compared to the control mix. Using jute fiber in concrete at 1.5% increases the tensile strength by up to 110% compared to the control mix. Using coir fiber in concrete at 1.5% increases the tensile strength by up to 60% compared to the control mix.

Zitieren

APA

Shkur, S. S., Mohammed, A. A., Ahmad, S. A., & Mahmood, H. F. (2025). Effects of Using Natural Fibers on the Fresh and Mechanical Properties of Concrete: A Comprehensive Review. Smart and Green Materials. https://doi.org/10.70028/sgm.v2i2.47

Vancouver

Shkur SS, Mohammed AA, Ahmad SA, Mahmood HF. Effects of Using Natural Fibers on the Fresh and Mechanical Properties of Concrete: A Comprehensive Review. Smart and Green Materials. 2025. doi:10.70028/sgm.v2i2.47

BibTeX
@article{Shkur2025,
  author = {Shkur, Sardam Salam and Mohammed, Azad Abdwlqadir and Ahmad, Soran Abdrahman and Mahmood, HERSH F},
  title = {Effects of Using Natural Fibers on the Fresh and Mechanical Properties of Concrete: A Comprehensive Review},
  journal = {Smart and Green Materials},
  year = {2025},
  doi = {10.70028/sgm.v2i2.47}
}
Kostenlos starten →