EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

The Influence of Fly Ash Incorporation on the Compressive Strength of Foamed Concrete

Munawir Munawir, Sriyani Sriyani, Manovri Yeni, Haris Saputra

Materials and Structures for Sustainable Infrastructure · 31.05.2026 · 1 (1) · 17-31

DOI: 10.70028/mssi.v1i1.98 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials and Structures for Sustainable Infrastructure, online erschienen am 31.05.2026. Verfasst von Munawir Munawir und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Foamed concrete is a lightweight cement-based material with considerable potential for embankment construction on soft soils because its low density can reduce vertical stress on weak subgrades and minimize settlement problems. The use of fly ash as a partial cement replacement also supports material efficiency and the development of more sustainable cementitious composites. However, the incorporation of fly ash in low-density foamed concrete must be carefully evaluated because it may affect both fresh-state performance and early-age strength development. This study investigates the influence of fly ash replacement on the flowability and compressive strength of foamed concrete and identifies the most suitable mixture for lightweight embankment applications. Foamed concrete mixtures were designed using a trial mix approach with a target density of 800 kg/m³. Fly ash was used to replace cement at 0%, 10%, 20%, and 30% by weight. Flowability was measured to assess workability, while compressive strength tests were conducted at 7 and 14 days to evaluate mechanical performance. The results show that increasing fly ash content consistently reduced flowability and compressive strength due to cement dilution and lower early-age binding capacity. The control mixture achieved the highest 14-day compressive strength of 2.70 MPa, while the 10% fly ash mixture reached 2.25 MPa and still met the performance requirements for lightweight embankment materials. Mixtures with 20% and 30% fly ash showed a substantial reduction in strength and workability. Therefore, 10% fly ash replacement provides the most balanced performance and is recommended as a technically feasible and material-efficient alternative for lightweight embankment construction on soft soils.

Zitieren

APA

Munawir, M., Sriyani, S., Yeni, M., & Saputra, H. (2026). The Influence of Fly Ash Incorporation on the Compressive Strength of Foamed Concrete. Materials and Structures for Sustainable Infrastructure, 1(1), 17-31. https://doi.org/10.70028/mssi.v1i1.98

Vancouver

Munawir M, Sriyani S, Yeni M, Saputra H. The Influence of Fly Ash Incorporation on the Compressive Strength of Foamed Concrete. Materials and Structures for Sustainable Infrastructure. 2026;1(1):17-31. doi:10.70028/mssi.v1i1.98

BibTeX
@article{Munawir2026,
  author = {Munawir, Munawir and Sriyani, Sriyani and Yeni, Manovri and Saputra, Haris},
  title = {The Influence of Fly Ash Incorporation on the Compressive Strength of Foamed Concrete},
  journal = {Materials and Structures for Sustainable Infrastructure},
  year = {2026},
  volume = {1},
  number = {1},
  pages = {17--31},
  doi = {10.70028/mssi.v1i1.98}
}
Kostenlos starten →