Effect of Increasing Ablation Energy on the Physical Properties of CuO and Al2O3 Nanoparticles
Iraqi Journal for Applied Sciences · 2025
DOI: 10.69923/5xtj4329 ↗Kurz gefasst
Fachartikel in der Zeitschrift Iraqi Journal for Applied Sciences, 2025. Verfasst von Saif Khalel Jasim.
Abstract (Originalsprache)
In this study, copper (Cu) and aluminium (Al) nanoparticles (NPs) were prepared to study their physical properties in a simple, easy and environmentally friendly way using a switched Nd:YAG laser by bombarding the target placed in a liquid-filled beaker at a rate of 600 pulses per second, an ablation energy of 200 and 400 mJ and a frequency of 2 Hz. The XRD results indicate that cubic symmetry was obtained for copper and also for aluminium. The average nanoparticle size determined by TEM was (20 nm) for copper and the average size of aluminium diameters was (22 nm). As for the optical properties, at 200, and 400 mJ the surface plasmon resonance (SPR) peak for copper was at (295, and 655 nm) while aluminium was at (288, and 289 nm) respectively, and the energy gap for copper was (3.17, and 3.2 eV) and aluminium was (4.6, and 4.7 eV) respectively. These materials are very useful for applications in photocatalysis and sensors.
Zitieren
APA
Jasim, S. K. (2025). Effect of Increasing Ablation Energy on the Physical Properties of CuO and Al2O3 Nanoparticles. Iraqi Journal for Applied Sciences. https://doi.org/10.69923/5xtj4329
Vancouver
Jasim SK. Effect of Increasing Ablation Energy on the Physical Properties of CuO and Al2O3 Nanoparticles. Iraqi Journal for Applied Sciences. 2025. doi:10.69923/5xtj4329
BibTeX
@article{Jasim2025,
author = {Jasim, Saif Khalel},
title = {Effect of Increasing Ablation Energy on the Physical Properties of CuO and Al2O3 Nanoparticles},
journal = {Iraqi Journal for Applied Sciences},
year = {2025},
doi = {10.69923/5xtj4329}
}
EUVIMED