EUVIMEDEUVIMED entdecken
Crossref

Elastohydrodynamic Lubrication Modeling of NSF H1 Bio-Based Lubricants in High-Pressure Food Processing Pumps Under 600 Mpa Cyclic Loads

Dr. Suresh Jadhav, Megha Nagrale, Dr. Sachin Waghmare, Sachin Vankar

International Journal of Food and Nutritional Sciences · 29.09.2021 · 10 (9) · 1489-1501

DOI: 10.69889/fhvq5j87 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Food and Nutritional Sciences, online erschienen am 29.09.2021. Verfasst von Dr. Suresh Jadhav und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-pressure food processing pumps subject lubricated stainless steel contacts to cyclic pressures reaching 600 MPa, where NSF H1 bio-based polyol esters must prevent micropitting without restricted extreme-pressure additives while enduring Clean-in-Place (CIP) water contamination. Because conventional 2D transient Thermal-Elastohydrodynamic Lubrication (TEHL) solvers are computationally prohibitive for multi-regime fatigue analysis, this study introduces a hybrid physics-informed machine learning framework combining Multi-Level Multi-Integration (MLMI), a 3D Fourier Neural Operator (EHL_FNO3D), a 2D FFT Boussinesq subsurface stress solver, and ASTM E1049 Rainflow cumulative damage modeling. Trained on a Latin Hypercube Sampling (LHS) dataset spanning 1–50 Hz cycle frequencies, 150–600 MPa loads, and 0–10% water dilution, EHL_FNO3D reconstructs transient 2D pressure and logarithmic film thickness fields with hard cavitation enforcement in milliseconds. Results reveal that 8% CIP water dilution collapses horseshoe minimum film thickness by 61% (from 115.7 nm to 45.0 nm) at 600 MPa, triggering mixed lubrication ( 1.0) on precision-ground surfaces (= 45 nm). Simultaneously, the 745 MPa outlet Petrusevich spike shifts peak subsurface Von Mises stress to a shallow depth of (Z/a = 0.11-391.1 MPa). Under a combined production and post-CIP washdown schedule at 1,200 RPM, baseline 2205 Duplex steel initiates micropitting in 121.4 hours, whereas upgrading to 17-4PH H900 extends fatigue life by 27.5× to 3,340.0 hours, providing a real-time digital-twin methodology for esigning durable, food-safe high-pressure pumping systems.

Zitieren

APA

Jadhav, D. S., Nagrale, M., Waghmare, D. S., & Vankar, S. (2021). Elastohydrodynamic Lubrication Modeling of NSF H1 Bio-Based Lubricants in High-Pressure Food Processing Pumps Under 600 Mpa Cyclic Loads. International Journal of Food and Nutritional Sciences, 10(9), 1489-1501. https://doi.org/10.69889/fhvq5j87

Vancouver

Jadhav DS, Nagrale M, Waghmare DS, Vankar S. Elastohydrodynamic Lubrication Modeling of NSF H1 Bio-Based Lubricants in High-Pressure Food Processing Pumps Under 600 Mpa Cyclic Loads. International Journal of Food and Nutritional Sciences. 2021;10(9):1489-1501. doi:10.69889/fhvq5j87

BibTeX
@article{Jadhav2021,
  author = {Jadhav, Dr. Suresh and Nagrale, Megha and Waghmare, Dr. Sachin and Vankar, Sachin},
  title = {Elastohydrodynamic Lubrication Modeling of NSF H1 Bio-Based Lubricants in High-Pressure Food Processing Pumps Under 600 Mpa Cyclic Loads},
  journal = {International Journal of Food and Nutritional Sciences},
  year = {2021},
  volume = {10},
  number = {9},
  pages = {1489--1501},
  doi = {10.69889/fhvq5j87}
}
Kostenlos starten →