EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comparative Analysis of Concrete Curing Methods under Cold and Damp Climatic Conditions: A Case Study of Kabul, Afghanistan

Mohammad Hashim Ayaz, Hedayat Ullah Safi, Amanullah Faqiri, Muhammad Qais Totakhel, Shir Zaman Sahak

Scientific Journal of Engineering, and Technology · 21.07.2026 · 3 (2) · 70-77

DOI: 10.69739/sjet.v3i2.2139 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scientific Journal of Engineering, and Technology, online erschienen am 21.07.2026. Verfasst von Mohammad Hashim Ayaz und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The curing of concrete is an essential procedure to ensure proper hydration and development of strength. Especially in cold weather, where low temperatures can cause a delay in cement hydration, this process is crucial. In this paper, we will discuss how four different curing techniques behave under the cold and humid climate of Kabul, Afghanistan. In all, 36 cubes made of M25 concrete mix, with a water-cement ratio of 0.45, and dimensions 150×150×150mm were produced, and 9 samples were tested for compressive strength on days 7, 14, and 28, respectively. The outcome indicated that the curing method had a significant impact on compressive strength. Curing through a plastic membrane demonstrated high compressive strength with values 27.65MPa, 31.33MPa, and 33.45MPa at 7, 14, and 28 days, respectively. On the other hand, water immersion curing had comparatively lower performance due to the low temperature of the curing water (4.6-14.1°C). It is evident from the results that the curing processes that can ensure simultaneous maintenance of moisture and heat retention are more efficient compared to the curing procedures based on moisture alone. Hence, plastic membrane curing is suggested as an effective technique for concrete performance enhancement under such climatic conditions as in Kabul. While these findings are specific to M25 concrete, they provide a basis for selecting appropriate curing techniques in similar cold climates.

Zitieren

APA

Ayaz, M. H., Safi, H. U., Faqiri, A., Totakhel, M. Q., & Sahak, S. Z. (2026). A Comparative Analysis of Concrete Curing Methods under Cold and Damp Climatic Conditions: A Case Study of Kabul, Afghanistan. Scientific Journal of Engineering, and Technology, 3(2), 70-77. https://doi.org/10.69739/sjet.v3i2.2139

Vancouver

Ayaz MH, Safi HU, Faqiri A, Totakhel MQ, Sahak SZ. A Comparative Analysis of Concrete Curing Methods under Cold and Damp Climatic Conditions: A Case Study of Kabul, Afghanistan. Scientific Journal of Engineering, and Technology. 2026;3(2):70-77. doi:10.69739/sjet.v3i2.2139

BibTeX
@article{Ayaz2026,
  author = {Ayaz, Mohammad Hashim and Safi, Hedayat Ullah and Faqiri, Amanullah and Totakhel, Muhammad Qais and Sahak, Shir Zaman},
  title = {A Comparative Analysis of Concrete Curing Methods under Cold and Damp Climatic Conditions: A Case Study of Kabul, Afghanistan},
  journal = {Scientific Journal of Engineering, and Technology},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {70--77},
  doi = {10.69739/sjet.v3i2.2139}
}
Kostenlos starten →