Experimental and Simulation Study of Copper (II) Adsorption on Activated Carbon Using Date nuts
Journal of Applied Engineering Science and Technology · 11.07.2026 · 6 (2)
DOI: 10.69717/jaest.v6.i2.171 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering Science and Technology, online erschienen am 11.07.2026. Verfasst von Houda HASSOUNA und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates the efficiency of Cu2+ ion removal using powdered activated carbon derived from date nuts in aqueous solutions. The maximum adsorption capacity reached 98.34 mg/g (Langmuir model) with a removal efficiency of 83.0 % at optimal conditions (initial concentration = 3 g/L, adsorbent dosage = 4 g/L, pH = 7.0, temperature = 25°C). Near-equilibrium was approached after 90 minutes, as adsorption became very slow after 60 minutes with only 3.6 % increase between 60 and 90 minutes. Kinetic analysis indicates that the pseudo-second-order model best describes the adsorption behavior with a correlation coefficient of R2 = 0.999. The computational model (Hassouna Algorithm) achieved a strong correlation coefficient of R2 = 0.999 and a very low mean squared error of MSE = 3.94 × 10-4, demonstrating high predictive accuracy. The Langmuir isotherm (R2 = 0.9964) provided a better fit than the Freundlich model (R2 = 0.9140), indicating monolayer adsorption on a homogeneous surface. The pseudo-second-order kinetic model (R2 = 1.0) suggests that chemisorption is the rate-limiting step. Overall, the findings confirm that biomass-derived activated carbon combined with computational modeling offers an effective and sustainable approach for copper removal in waste water treatment. Highlights Date-nut-derived activated carbon is an effective adsorbent for Cu2+. Adsorption is strongly affected by contact time and initial concentration. Langmuir isotherm and pseudo-second-order kinetic model best describe the process. MATLAB-based Hassouna Algorithm provides accurate adsorption simulation. Excellent agreement between experimental and modeled data (R2 ≈ 0.999).
Zitieren
APA
HASSOUNA, H., Rehali, H., & Athmani, K. (2026). Experimental and Simulation Study of Copper (II) Adsorption on Activated Carbon Using Date nuts. Journal of Applied Engineering Science and Technology, 6(2). https://doi.org/10.69717/jaest.v6.i2.171
Vancouver
HASSOUNA H, Rehali H, Athmani K. Experimental and Simulation Study of Copper (II) Adsorption on Activated Carbon Using Date nuts. Journal of Applied Engineering Science and Technology. 2026;6(2). doi:10.69717/jaest.v6.i2.171
BibTeX
@article{HASSOUNA2026,
author = {HASSOUNA, Houda and Rehali, Hanane and Athmani, Khaled},
title = {Experimental and Simulation Study of Copper (II) Adsorption on Activated Carbon Using Date nuts},
journal = {Journal of Applied Engineering Science and Technology},
year = {2026},
volume = {6},
number = {2},
doi = {10.69717/jaest.v6.i2.171}
}
EUVIMED