Influence of the cyclic loading of very large number of cycles on the pile capacity
Journal of Applied Engineering Science & Technology · 2016
DOI: 10.69717/jaest.v2.i2.40 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Engineering Science & Technology, 2016. Verfasst von Hadj Bekki und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The paper presents a study of the bearing capacity of a pile model in calibrationchamber, under a cyclic axial loading, up to very large number of cycles. The experimental study isaimed to the evolution of the bearing capacity of pile obtained after a cyclic loading up to 105cycles. Firstly, we present briefly the experimental device and then the results of cyclic testsperformed on the pile model in the calibration chamber. Several parameters which have asignificant influence on the cyclic behavior of piles have been investigated, such as the cyclicdisplacement amplitude and the density of the soil. The analysis of results indicated that themechanism of densification of the soil around the pile leads to improve pile capacity.
Zitieren
APA
Bekki, H., Tali, B., Canou, J., Dupla, J., & Bouafia, A. (2016). Influence of the cyclic loading of very large number of cycles on the pile capacity. Journal of Applied Engineering Science & Technology. https://doi.org/10.69717/jaest.v2.i2.40
Vancouver
Bekki H, Tali B, Canou J, Dupla J, Bouafia A. Influence of the cyclic loading of very large number of cycles on the pile capacity. Journal of Applied Engineering Science & Technology. 2016. doi:10.69717/jaest.v2.i2.40
BibTeX
@article{Bekki2016,
author = {Bekki, Hadj and Tali, Brahim and Canou, Jean and Dupla, Jean-Claude and Bouafia, Ali},
title = {Influence of the cyclic loading of very large number of cycles on the pile capacity},
journal = {Journal of Applied Engineering Science & Technology},
year = {2016},
doi = {10.69717/jaest.v2.i2.40}
}
EUVIMED