Accelerated Charcoal Briquette Production: Innovative Drying Technology for Performance Assessment and Energy Consumption
Journal of Renewable Energy and Smart Grid Technology · 07.05.2026 · 21 (1) · 119-129
DOI: 10.69650/rast.2026.264894 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Renewable Energy and Smart Grid Technology, online erschienen am 07.05.2026. Verfasst von Chanon Bunmephiphit und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Currently, the process of charcoal briquette production comprises three primary stages and typically spans 5–7 days. Each stage aims to maximize the thermal efficiency of the final product. The initial phase involves the preparation of raw materials, including the formulation of mixtures and the selection of components or treatments that enhance the calorific value of the briquettes. The second stage focuses on high-yield briquette formation, optimizing compaction and shaping techniques to produce charcoal briquettes in large quantities. The final, most time-consuming stage is the drying process, which significantly influences the overall production cycle. This study aims to design an accelerated high-temperature drying system to reduce the processing time for charcoal briquettes, specifically targeting moisture contents between 25–30% post-formation. The proposed system is designed to handle 50 kg of briquettes per batch, arranged in five layers (10+ kg per layer, 5 layers total), and utilizes three infrared burners, measured and controlled by a PID (Proportional-Integral-Derivative) control system. The parameters are tailored based on the drying behavior of charcoal to achieve a final moisture content of less than 8%, in compliance with industry standards. Experimental results indicate that the five-layer drying chamber effectively generates uniform heat distribution and enhances internal air circulation, enabling consistent and thorough drying. The drying sequence starts from the bottom layer and progresses upward. Among the tested conditions, drying at 150°C demonstrated the highest efficiency, providing the most suitable drying time and the lowest fuel consumption rate, thereby improving both energy efficiency and production throughput.
Zitieren
APA
Bunmephiphit, C., Sasujit, K., Thararux, C., & Homdoung, N. (2026). Accelerated Charcoal Briquette Production: Innovative Drying Technology for Performance Assessment and Energy Consumption. Journal of Renewable Energy and Smart Grid Technology, 21(1), 119-129. https://doi.org/10.69650/rast.2026.264894
Vancouver
Bunmephiphit C, Sasujit K, Thararux C, Homdoung N. Accelerated Charcoal Briquette Production: Innovative Drying Technology for Performance Assessment and Energy Consumption. Journal of Renewable Energy and Smart Grid Technology. 2026;21(1):119-129. doi:10.69650/rast.2026.264894
BibTeX
@article{Bunmephiphit2026,
author = {Bunmephiphit, Chanon and Sasujit, Kittikorn and Thararux, Churat and Homdoung, Nigran},
title = {Accelerated Charcoal Briquette Production: Innovative Drying Technology for Performance Assessment and Energy Consumption},
journal = {Journal of Renewable Energy and Smart Grid Technology},
year = {2026},
volume = {21},
number = {1},
pages = {119--129},
doi = {10.69650/rast.2026.264894}
}
EUVIMED