Performance Evaluation of the Domestically Developed Powered Air Purify Respirator in Thailand
Asian Health, Science and Technology Reports · 2025
DOI: 10.69650/ahstr.2025.3090 ↗Kurz gefasst
Fachartikel in der Zeitschrift Asian Health, Science and Technology Reports, 2025. Verfasst von Kanit Tapasa und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The initial outbreak of COVID-19 in Thailand in 2020 revealed critical shortages in personal protective equipment (PPE), particularly Powered Air-Purifying Respirators (PAPRs), which are essential for protecting medical personnel from airborne pathogens. This study compared the performance of domestically manufactured PAPRs in Thailand (MM and PP) to two commercially imported models (TM and SM), both of which are generally recognized for their compliance with the EN 12941 standard. The study involved 20 subjects, comprised of 10 males and 10 females, to evaluate three key parameters: total inward leakage (TIL), air supply, and breathing resistance. To replicate real-world conditions, subjects wore ASTM-certified surgical masks beneath the PAPR during the TIL tests. The TIL test employed sodium chloride particles produced by an atomizer and was carried out in a sealed chamber. A scanning mobility particle sizer and laser photometer were used to monitor the concentrations of particles both within and outside the respirator. Leakage under dynamic situations was evaluated using standardized exercises following EN 12941 guidelines. Air supply and breathing resistance were tested with a Sheffield dummy head following international protocols. All PAPRs achieved %TIL values below the 1% EN 12941 threshold, with the TM model having the lowest leakage (0.097%). Domestically produced models performed similarly, with small variations in the PP model due to its PTFE membrane filter. Airflow rates exceeded the design specifications while breathing resistance remained within acceptable limits. Compared to a previous study utilizing dummy head testing, this research demonstrated improved consistency in %TIL results by employing human subjects, emphasizing the importance of real-world testing conditions. Furthermore, the present study highlights the potential of domestically manufactured PAPRs to serve as viable, cost-effective alternatives to imported models. Thai-manufactured PAPRs may improve national resilience in future public health emergencies while lowering reliance on global supply chains if they comply with rigorous testing requirements and demonstrate equivalent protective effectiveness.
Zitieren
APA
Tapasa, K., Suriyoporn, S., Kaewmorakot, K., Meechoowas, E., & Sawangboon, N. (2025). Performance Evaluation of the Domestically Developed Powered Air Purify Respirator in Thailand. Asian Health, Science and Technology Reports. https://doi.org/10.69650/ahstr.2025.3090
Vancouver
Tapasa K, Suriyoporn S, Kaewmorakot K, Meechoowas E, Sawangboon N. Performance Evaluation of the Domestically Developed Powered Air Purify Respirator in Thailand. Asian Health, Science and Technology Reports. 2025. doi:10.69650/ahstr.2025.3090
BibTeX
@article{Tapasa2025,
author = {Tapasa, Kanit and Suriyoporn, Surisa and Kaewmorakot, Kansiree and Meechoowas, Ekarat and Sawangboon, Nuttawan},
title = {Performance Evaluation of the Domestically Developed Powered Air Purify Respirator in Thailand},
journal = {Asian Health, Science and Technology Reports},
year = {2025},
doi = {10.69650/ahstr.2025.3090}
}
EUVIMED