Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing
InterPore Journal · 01.12.2025 · 2 (4) · IPJ011225-6
DOI: 10.69631/dpd8ha46 ↗Kurz gefasst
Fachartikel in der Zeitschrift InterPore Journal, online erschienen am 01.12.2025. Verfasst von Md. Fahim Salek und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Caprock formations are a crucial part of subsurface-engineered systems. Composed largely of shale, caprocks act as natural barriers that prevent the upward migration of fluids, thereby ensuring the containment of stored substances in subsurface formations. Fractures in these formations are potential leakage pathways for stored fluids. Mineral precipitation reactions in these fractures, particularly calcite, can significantly restrict the fluid permeability, reducing leakage potential. However, predictive capabilities of mineral precipitation in fractures and associated permeability evolution are limited due to a lack of fundamental understanding of such reactions in natural samples, complicated by mineral heterogeneity and the complexity of the fracture structure. In this study, 3D-printed fracture samples are used to understand the impact of carbonate mineralization on fracture aperture and permeability evolution. Samples were printed using a digital light processing (DLP) 3D printer and commercial liquid resin. Calcite precipitation was first tested on printed 2D films before conducting plug flow column experiments aimed to understand fracture permeability changes due to mineral precipitation. Contact angle measurement and Fourier transform infrared (FTIR) spectroscopy on printed 2D films show evidence of a substantial amount of surface energy for calcite nucleation and precipitation. Surface topography analysis of printed fractured surfaces reveals comparable values, highlighting the high replicability of the printed samples. During the column experiments, the permeability reduces exponentially due to a decrease in fracture aperture. Reductions in fracture aperture estimated from effluent concentration and 3D X-ray computed tomography (CT) show comparable results. Moreover, 3D X-ray CT images suggest the impact of local flow velocities on precipitation. The insights gained from this research contribute to a deeper understanding of the permeability evolution due to carbonate mineralization in caprock formations.
Zitieren
APA
Salek, M. F., Kumar, H. K. S., Nahian, A. A., Mahmood, S., Beckingham, B. S., Schulze, K., & Beckingham, L. E. (2025). Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing. InterPore Journal, 2(4), IPJ011225-6. https://doi.org/10.69631/dpd8ha46
Vancouver
Salek MF, Kumar HKS, Nahian AA, Mahmood S, Beckingham BS, Schulze K, et al. Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing. InterPore Journal. 2025;2(4):IPJ011225-6. doi:10.69631/dpd8ha46
BibTeX
@article{Salek2025,
author = {Salek, Md. Fahim and Kumar, Harrish Kumar Senthil and Nahian, Abdullah Al and Mahmood, Samsul and Beckingham, Bryan S. and Schulze, Kyle and Beckingham, Lauren E.},
title = {Understanding Fracture Aperture and Permeability Evolution due to Carbonate Mineralization Utilizing 3D Printing},
journal = {InterPore Journal},
year = {2025},
volume = {2},
number = {4},
pages = {IPJ011225--6},
doi = {10.69631/dpd8ha46}
}
EUVIMED