Optimization of nanocrystalline cellulose particle size using one-factor-at-a-time method under different acid hydrolysis parameters
Science, Engineering and Health Studies · 2023
DOI: 10.69598/sehs.17.23030001 ↗Kurz gefasst
Fachartikel in der Zeitschrift Science, Engineering and Health Studies, 2023. Verfasst von Chu Yong Soon und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
This study explores the production of nanocrystalline cellulose (NCC) from corn cob (Zea mays), aiming to overcome the challenges of carbonization and reduced yield typically associated with the use of highly concentrated and corrosive sulfuric acid. A systematic approach was adopted employing one-factor-at-a-time analysis to optimize the hydrolysis process, focusing on three key parameters: sulfuric acid concentration, hydrolysis temperature, and duration. The determination of optimized conditions was based on the desired particle size of the NCC produced and the absence of carbonization. The produced NCC was thoroughly characterized using Fourier transform infrared spectroscopy to determine its chemical structure, X-ray diffraction for crystallinity, and thermogravimetric analysis (TGA) for thermal properties. The results highlighted that the optimal conditions for NCC production involve a sulfuric acid concentration of 40 wt% at a temperature of 70 °C, with a hydrolysis duration of 150 min. These conditions yielded NCC with a uniform particle size of 225.07 nm, no signs of carbonization, and a significantly lower inorganic content at 6.73 w/w% after heating to 590 °C in the TGA. This study thereby offers valuable insights for producing NCC with reduced carbonization and increased yield.
Zitieren
APA
Soon, C. Y., Lim, C. S. S., Hariyanto, Y., Talib, R. A., Abdan, K., Wong, C. W., & Chan, E. W. C. (2023). Optimization of nanocrystalline cellulose particle size using one-factor-at-a-time method under different acid hydrolysis parameters. Science, Engineering and Health Studies. https://doi.org/10.69598/sehs.17.23030001
Vancouver
Soon CY, Lim CSS, Hariyanto Y, Talib RA, Abdan K, Wong CW, et al. Optimization of nanocrystalline cellulose particle size using one-factor-at-a-time method under different acid hydrolysis parameters. Science, Engineering and Health Studies. 2023. doi:10.69598/sehs.17.23030001
BibTeX
@article{Soon2023,
author = {Soon, Chu Yong and Lim, Carine Shu Shien and Hariyanto, Yonchen and Talib, Rosnita Abdul and Abdan, Khalina and Wong, Chen Wai and Chan, Eric Wei Chiang},
title = {Optimization of nanocrystalline cellulose particle size using one-factor-at-a-time method under different acid hydrolysis parameters},
journal = {Science, Engineering and Health Studies},
year = {2023},
doi = {10.69598/sehs.17.23030001}
}
EUVIMED