EUVIMEDEUVIMED entdecken
Crossref

A Parametric Study on Load Carrying Capacity of Backfilled Masonry Arch Bridges in Afghanistan

KHAWJA DAUD KAWKABI, KHAJA WAHAAJUDDIN KAWKABI, MUJTABA AMIN

Kabul Polytechnic University International Journal of Engineering & Technology · 22.08.2026 · 4 (1) · 81-94

DOI: 10.68924/6rsydf40 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Kabul Polytechnic University International Journal of Engineering & Technology, online erschienen am 22.08.2026. Verfasst von KHAWJA DAUD KAWKABI und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To be classed for accepting larger axle loads, vehicle speeds, and a growth in the amount of containerized road traffic, old masonry arch bridges must be evaluated from a fresh technical perspective and with the use of newly developed structural analysis tools. It is critical in this context to have specialist assessment methodologies due to the particular structural behaviour of these bridges, the lack of readily available data, and the trustworthiness of that data. To this end, two dimensional finite element (FE) models are developed by incorporating the detailed geometric complexities of the arch bridge with backfill. Due to lack of data in the plastic performance of the masonry material used in the arch bridges, the analysis is conducted based on the stress control method in the linear elastic method. Beside numerical models empirical approaches such as FILEV and MEXE are also used to study The technical analysis of masonry arches from a historical viewpoint will provide important knowledge for bridge retrofitting. Masonry arch bridges are mostly common in Asian Countries from old to modern types. The structural characteristic and parameters in these bridges can differ for each place due to material used for arch and aesthetic considerations of each culture; however, arch profile can be an important characteristic that effects the mechanical behaviour of bridge. This study deals with the load carrying capacity of the arched bridges of different geometric configuration with elastic material properties, and aims to determine permissible axle load for masonry bridges which are currently in use in Afghanistan transportation corridors. A wide range of arch bridges can be seen in Afghanistan. Old and new masonry bridges are currently in use in many cities for major highways. Mechanical analysis are also conducted in order to study the effect of arch profile on stress- strain behaviour of bridge. Studies in this paper is based on mechanical and physical observations from site. According to the results of the investigation, MEXE and FILEV techniques are effective approaches for estimating the safety and allowable tonnage of masonry arch bridges and have good fit with numerical and FE model results. According to FE and empirical study, masonry arch bridges with v/l arch parameter values less than 0.2 for stone masonry arch bridges and 0.42 for brick masonry bridges should not be accessible to heavy traffic (trucks with axle loads more than 10 tonnes).

Zitieren

APA

KAWKABI, K. D., KAWKABI, K. W., & AMIN, M. (2026). A Parametric Study on Load Carrying Capacity of Backfilled Masonry Arch Bridges in Afghanistan. Kabul Polytechnic University International Journal of Engineering & Technology, 4(1), 81-94. https://doi.org/10.68924/6rsydf40

Vancouver

KAWKABI KD, KAWKABI KW, AMIN M. A Parametric Study on Load Carrying Capacity of Backfilled Masonry Arch Bridges in Afghanistan. Kabul Polytechnic University International Journal of Engineering & Technology. 2026;4(1):81-94. doi:10.68924/6rsydf40

BibTeX
@article{KAWKABI2026,
  author = {KAWKABI, KHAWJA DAUD and KAWKABI, KHAJA WAHAAJUDDIN and AMIN, MUJTABA},
  title = {A Parametric Study on Load Carrying Capacity of Backfilled Masonry Arch Bridges in Afghanistan},
  journal = {Kabul Polytechnic University International Journal of Engineering & Technology},
  year = {2026},
  volume = {4},
  number = {1},
  pages = {81--94},
  doi = {10.68924/6rsydf40}
}
Kostenlos starten →