Mechanical Performance of Blockboard Before and After High-Pressure Laminate Surface Treatment
Jurnal Rekayasa Lingkungan dan Keberlanjutan · 2026
DOI: 10.68728/jrlk.v1i2.10 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Rekayasa Lingkungan dan Keberlanjutan, 2026. Verfasst von Yurnalis und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Blockboard is widely used in furniture and lightweight construction because of its favourable strength, workability, and affordability. High-pressure laminate (HPL) is commonly applied to improve surface appearance and protection; however, its effect on blockboard's mechanical performance requires further evaluation. This study compared the flexural and compressive performance of blockboard before and after HPL surface treatment. We used an experimental comparative method with uncoated and HPL-coated blockboard specimens. Flexural specimens measuring 21 × 5 × 5.4 cm and compression specimens measuring 5 × 5 × 5.4 cm were progressively loaded until failure using a testing machine, and their maximum loads were recorded. The flexural test showed that the maximum load decreased from 965.5 N for uncoated blockboard to 748.6 N after HPL application, representing a reduction of approximately 22.5%. Conversely, the maximum compressive load increased from 94.3 kN to 186.4 kN, equivalent to an improvement of approximately 97.7%. These contrasting results indicate that HPL affects blockboard performance differently under different loading conditions. Improved compressive resistance may result from surface reinforcement and better load distribution, whereas reduced flexural performance may reflect bonding quality, material structure, or stress concentration. The results suggest that HPL treatment substantially improves the compressive load capacity of blockboard but does not necessarily enhance its flexural performance.
Zitieren
APA
Yurnalis, Mahyuddin, Faisal, M., Lindawati, & Iqbal (2026). Mechanical Performance of Blockboard Before and After High-Pressure Laminate Surface Treatment. Jurnal Rekayasa Lingkungan dan Keberlanjutan. https://doi.org/10.68728/jrlk.v1i2.10
Vancouver
Yurnalis, Mahyuddin, Faisal M, Lindawati, Iqbal. Mechanical Performance of Blockboard Before and After High-Pressure Laminate Surface Treatment. Jurnal Rekayasa Lingkungan dan Keberlanjutan. 2026. doi:10.68728/jrlk.v1i2.10
BibTeX
@article{Yurnalis2026,
author = {Yurnalis and Mahyuddin and Faisal, Muhammad and Lindawati and Iqbal},
title = {Mechanical Performance of Blockboard Before and After High-Pressure Laminate Surface Treatment},
journal = {Jurnal Rekayasa Lingkungan dan Keberlanjutan},
year = {2026},
doi = {10.68728/jrlk.v1i2.10}
}
EUVIMED