EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Cutting Waste Reduction of Textile Laminating Material in the Footwear Industry: A DMAIC Approach

Adi Priansyah, Jauharatul Wardah

Journal of Sustainable Supply Chain and Technology · 30.09.2026 · 1 (2) · 81-93

DOI: 10.68459/jssct.v1.i2.607 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Sustainable Supply Chain and Technology, online erschienen am 30.09.2026. Verfasst von Adi Priansyah und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The footwear industry uses large quantities of sheet materials in the production of upper components, resulting in unused material during the cutting process that has the potential to become cutting waste. This condition can reduce material utilization efficiency and increase the amount of material required during production. This study aimed to analyze and reduce cutting waste in the Textile Laminating Material cutting process using the DMAIC approach. The study was conducted through the Define, Measure, Analyze, Improve, and Control stages. Potential causes were identified using a Fishbone Diagram, and improvement priorities were determined through Pareto Analysis. The measurement results showed that the average cutting waste under the initial condition was 29.33%. The Pareto Analysis showed that Uncombined patterns, Suboptimal nesting, and Excessive gaps between patterns were the three factors with the highest frequencies, cumulatively accounting for 62.37% of all observed occurrences. The improvement was implemented through pattern nesting optimization by utilizing the empty spaces between vamp patterns to accommodate tongue patterns. The results indicated that pattern nesting optimization could serve as a relevant improvement alternative for increasing material utilization and reducing potential cutting waste.

Zitieren

APA

Priansyah, A., & Wardah, J. (2026). Cutting Waste Reduction of Textile Laminating Material in the Footwear Industry: A DMAIC Approach. Journal of Sustainable Supply Chain and Technology, 1(2), 81-93. https://doi.org/10.68459/jssct.v1.i2.607

Vancouver

Priansyah A, Wardah J. Cutting Waste Reduction of Textile Laminating Material in the Footwear Industry: A DMAIC Approach. Journal of Sustainable Supply Chain and Technology. 2026;1(2):81-93. doi:10.68459/jssct.v1.i2.607

BibTeX
@article{Priansyah2026,
  author = {Priansyah, Adi and Wardah, Jauharatul},
  title = {Cutting Waste Reduction of Textile Laminating Material in the Footwear Industry: A DMAIC Approach},
  journal = {Journal of Sustainable Supply Chain and Technology},
  year = {2026},
  volume = {1},
  number = {2},
  pages = {81--93},
  doi = {10.68459/jssct.v1.i2.607}
}
Kostenlos starten →