Compatibility Limits of a Common Compliance Correction in Granite Compression Tests
Geotechnical Science and Engineering Journal · 04.08.2025 · 2025 (1) · 164-190
DOI: 10.68304/gsej2025.a107 ↗Kurz gefasst
Fachartikel in der Zeitschrift Geotechnical Science and Engineering Journal, online erschienen am 04.08.2025. Verfasst von Lukas Gruber und 4 weiteren Autor:innen.
Abstract (Originalsprache)
A constant correction to global displacement can reduce disagreement with local strain measurements without providing transferable rock moduli. This study tests the existence of a common correction using twelve uniaxial compression tests on Kuru Grey, Red Bohus and Sidobre granite. Over 30–60% of peak stress, the minimum achievable maximum discrepancy is 54.24% for all twelve records and 19.52% for six records sharing the slowest loading rate and highly linear paired responses. The latter result increases to 23.27% over a common 80–120 kN load interval. Thus, 20% compatibility is conditional on the selected loading domain. Within each of ten specimens retaining at least two highly linear disjoint windows, a constant correction still requires more than 21.98% tolerance. An independently favourable perturbation of local compliance by approximately ±9.97% restores 10% compatibility in the restricted collection; simultaneous independent perturbations of both channel slopes require only ±2.45%. Comparison with mean and least-squares corrections demonstrates that minimizing the largest in-sample discrepancy does not guarantee the smallest typical or omitted-specimen discrepancy. The resulting procedure provides an auditable finite-record compatibility decision, conditional on measurement definitions, loading domain and reference uncertainty, rather than an identification of machine compliance or intrinsic Young’s modulus.
Zitieren
APA
Gruber, L., Hofmann, A., Berger, M., Leitner, S., & Wagner, F. (2025). Compatibility Limits of a Common Compliance Correction in Granite Compression Tests. Geotechnical Science and Engineering Journal, 2025(1), 164-190. https://doi.org/10.68304/gsej2025.a107
Vancouver
Gruber L, Hofmann A, Berger M, Leitner S, Wagner F. Compatibility Limits of a Common Compliance Correction in Granite Compression Tests. Geotechnical Science and Engineering Journal. 2025;2025(1):164-190. doi:10.68304/gsej2025.a107
BibTeX
@article{Gruber2025,
author = {Gruber, Lukas and Hofmann, Anna and Berger, Matthias and Leitner, Sophie and Wagner, Florian},
title = {Compatibility Limits of a Common Compliance Correction in Granite Compression Tests},
journal = {Geotechnical Science and Engineering Journal},
year = {2025},
volume = {2025},
number = {1},
pages = {164--190},
doi = {10.68304/gsej2025.a107}
}
EUVIMED