Depth Averaging and Sampling-Layer Aggregation Beneath Uniform Circular Loads
Geotechnical Science and Engineering Journal · 14.02.2024 · 2024 (1) · 22-45
DOI: 10.68304/gsej2024.a102 ↗Kurz gefasst
Fachartikel in der Zeitschrift Geotechnical Science and Engineering Journal, online erschienen am 14.02.2024. Verfasst von Muhammad Ahsan Raza und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Assigning a precompression stress to the midpoint of a sampling range changes its position within the nonlinear stress field beneath a circular load. The effect depends on whether the range represents one collection layer or combines several separated layers. Closed-form depth integration, curvature bounds and endpoint stresses are evaluated for 4,254 confined-compression entries from 102 investigations. Only 111 distinct depth intervals occur, making the weighting of repeated collection depths consequential. At a load radius of 0.10 m, 13.47% of entries have an absolute midpoint–mean discrepancy above 5%; equal weighting of investigations reduces that fraction to 9.30%. Separating individual layers from pooled groups lowers the 95th-percentile discrepancy from 13.36% to 7.96% when the identified pooled groups are omitted. For the combined 0–0.28 m range, integration over the actual collection layers gives a midpoint discrepancy of −20.80%, compared with −13.36% when the whole depth range is weighted continuously. A curvature bound controls the midpoint–integral difference, whereas endpoint stresses quantify variation with depth. Under this footprint and 200 kPa, 2,980 entries satisfy a 10-kPa midpoint–mean tolerance but exceed the same tolerance in endpoint departure. These differences concern spatial assignment under the elastic loading model; they do not measure field yielding. Foundation investigations should retain collection boundaries and the structure of pooled measurements whenever stress varies appreciably across the sampled depths.
Zitieren
APA
Raza, M. A., Shah, H. A., Khan, A. B., Malik, U. T., & Qureshi, F. M. (2024). Depth Averaging and Sampling-Layer Aggregation Beneath Uniform Circular Loads. Geotechnical Science and Engineering Journal, 2024(1), 22-45. https://doi.org/10.68304/gsej2024.a102
Vancouver
Raza MA, Shah HA, Khan AB, Malik UT, Qureshi FM. Depth Averaging and Sampling-Layer Aggregation Beneath Uniform Circular Loads. Geotechnical Science and Engineering Journal. 2024;2024(1):22-45. doi:10.68304/gsej2024.a102
BibTeX
@article{Raza2024,
author = {Raza, Muhammad Ahsan and Shah, Hassan Ali and Khan, Ahmed Bilal and Malik, Usman Tariq and Qureshi, Fahad Mahmood},
title = {Depth Averaging and Sampling-Layer Aggregation Beneath Uniform Circular Loads},
journal = {Geotechnical Science and Engineering Journal},
year = {2024},
volume = {2024},
number = {1},
pages = {22--45},
doi = {10.68304/gsej2024.a102}
}
EUVIMED