EUVIMEDEUVIMED entdecken
Crossref

Variations of milling parameters and their effect on the volumetric sputtering yield of Silicon with the use of a plasma focused ion beam

Bean Otaibi

Young Australians Science Journal · 06.11.2026 · 1 (1) · 1-7

DOI: 10.67642/g1fw2r66 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Young Australians Science Journal, online erschienen am 06.11.2026. Verfasst von Bean Otaibi.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Volumetric sputtering is a technique used to polish the surface of materials at the atomic level used in the production of semi-conductors and nanotechnology. This study examined the effects of varying milling parameters, specifically voltage and current, on the volumetric sputtering yield of silicon using a plasma focused ion beam with argon gas. The experimental process used a Helios 5 Hydra DualBeam Scanning Electron Microscope Plasma Focused Ion Beam (SEM PFIB) to mill silicon surfaces with various voltage-current combinations. Milled depths were analysed in ImageJ, and volumetric sputtering yields were further calculated. The results demonstrate a statistically significant difference between the effects of voltage and current on the volumetric sputtering yield (ANOVA p = 0.02). Current was identified as a significant factor (p = 0.008), while voltage alone did not show statistical significance (p = 0.395). Accelerating voltages of 12 kV and 30 kV demonstrated the most stable and efficient sputtering processes. The results concluded that the inverse proportionality, \(\displaystyle Y_s = \frac{V_{\mathrm{removed}}}{q}\), was present between volumetric sputtering yield and charge, through volume removed, with a significant correlation between their natural logarithms (p = 0.003).

Zitieren

APA

Otaibi, B. (2026). Variations of milling parameters and their effect on the volumetric sputtering yield of Silicon with the use of a plasma focused ion beam. Young Australians Science Journal, 1(1), 1-7. https://doi.org/10.67642/g1fw2r66

Vancouver

Otaibi B. Variations of milling parameters and their effect on the volumetric sputtering yield of Silicon with the use of a plasma focused ion beam. Young Australians Science Journal. 2026;1(1):1-7. doi:10.67642/g1fw2r66

BibTeX
@article{Otaibi2026,
  author = {Otaibi, Bean},
  title = {Variations of milling parameters and their effect on the volumetric sputtering yield of Silicon with the use of a plasma focused ion beam},
  journal = {Young Australians Science Journal},
  year = {2026},
  volume = {1},
  number = {1},
  pages = {1--7},
  doi = {10.67642/g1fw2r66}
}
Kostenlos starten →