COMPARATIVE WEAR CHARACTERISTICS OF COPPER-BASED ELECTRODE ALLOYS AND THEIR IMPACT ON THE TENSILE STRENGTH OF ALLOYED STEEL SHEETS
Turan Journal of Applied Engineering · 13.05.2026 · 1 (1)
DOI: 10.67424/tjae.2026.005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Turan Journal of Applied Engineering, online erschienen am 13.05.2026. Verfasst von Adkham Alikulov und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This article presents the results of research on the application of copper-based composite electrodes with a composition of 98%Cu–2%Cr in the process of resistance spot welding. The electrodes were produced by the powder metallurgy method, and the operational properties of the developed Cu-2Cr (30 μm) electrodes were compared with the standard BrB2 electrodes and Cu-2Cr (50 μm) with different powder characteristics. The results showed that the newly developed composite electrodes exhibited higher wear resistance when the wear depth was 2 mm, which is 33% and 17% less than that of BrB2 electrodes (3 mm) and Cu-2Cr (50 μm) (2.5 mm), respectively. Additionally, tensile shear strength test results were obtained, and comparative analysis was conducted for alloyed steel weld joints obtained at different weld points. Alloyed steel sheets welded by Cu-2Cr (30 μm) electrodes illustrated the highest tensile-shear strength, especially the samples obtained at the initial stages with 453 MPa tensile strength, while the result reduced to 175 MPa as the electrode surface wear increased. The service life of the copper-chromium electrodes was extended by applying finer (30 μm) copper powders and import-substituting products was developed using local raw materials
Zitieren
APA
Alikulov, A., Bektemirov, B., Hanim, M. A., & Pouranvari, M. (2026). COMPARATIVE WEAR CHARACTERISTICS OF COPPER-BASED ELECTRODE ALLOYS AND THEIR IMPACT ON THE TENSILE STRENGTH OF ALLOYED STEEL SHEETS. Turan Journal of Applied Engineering, 1(1). https://doi.org/10.67424/tjae.2026.005
Vancouver
Alikulov A, Bektemirov B, Hanim MA, Pouranvari M. COMPARATIVE WEAR CHARACTERISTICS OF COPPER-BASED ELECTRODE ALLOYS AND THEIR IMPACT ON THE TENSILE STRENGTH OF ALLOYED STEEL SHEETS. Turan Journal of Applied Engineering. 2026;1(1). doi:10.67424/tjae.2026.005
BibTeX
@article{Alikulov2026,
author = {Alikulov, Adkham and Bektemirov, Begali and Hanim, M.A. Azmah and Pouranvari, Majid},
title = {COMPARATIVE WEAR CHARACTERISTICS OF COPPER-BASED ELECTRODE ALLOYS AND THEIR IMPACT ON THE TENSILE STRENGTH OF ALLOYED STEEL SHEETS},
journal = {Turan Journal of Applied Engineering},
year = {2026},
volume = {1},
number = {1},
doi = {10.67424/tjae.2026.005}
}
EUVIMED