Comparing the Performance of American Football Helmet Materials Using Finite Element Simulation
The Journal of Young Innovators · 15.10.2026 · 2 (2) · 76-101
DOI: 10.67419/jyi.v2i2.19 ↗Kurz gefasst
Fachartikel in der Zeitschrift The Journal of Young Innovators, online erschienen am 15.10.2026. Verfasst von Giorgio Sayde. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Concussions remain a major safety concern in the NFL, where player-to-player and head-to-ground impacts can generate substantial head loading. Building on a prior video-analysis project that identified common concussion mechanisms and impact locations, this study used finite element simulations in Autodesk Fusion 360 to evaluate how helmet materials affected force transmission to a simplified headform. Expanded polypropylene (EPP) and expanded thermoplastic polyurethane (E-TPU) padding were compared under low-, medium-, and high-magnitude prescribed frontal, side, and rear loads. Polycarbonate (PC) and high-strength polycarbonate (HS-PC) shells were compared under frontal loading. Outputs included peak headform contact force, peak linear acceleration, and total padding displacement. Compared with EPP, E-TPU reduced peak headform contact force by 30–53% under frontal loading and 41–48% under side loading. The largest acceleration reduction (60%) occurred under high-magnitude side loading, accompanied by a 50% increase in padding displacement. The high-magnitude rear-impact E-TPU simulation did not converge due to excessive padding compression. PC and HS-PC produced nearly identical frontal-force results. Because the model used simplified geometry and constraints, omitted rotational motion, and lacked experimental validation, these findings represent relative material comparisons rather than concussion-risk predictions. The results support further testing of zoned or multilayer EPP/E-TPU padding systems to balance lower peak loading with controlled deformation.
Zitieren
APA
Sayde, G. (2026). Comparing the Performance of American Football Helmet Materials Using Finite Element Simulation. The Journal of Young Innovators, 2(2), 76-101. https://doi.org/10.67419/jyi.v2i2.19
Vancouver
Sayde G. Comparing the Performance of American Football Helmet Materials Using Finite Element Simulation. The Journal of Young Innovators. 2026;2(2):76-101. doi:10.67419/jyi.v2i2.19
BibTeX
@article{Sayde2026,
author = {Sayde, Giorgio},
title = {Comparing the Performance of American Football Helmet Materials Using Finite Element Simulation},
journal = {The Journal of Young Innovators},
year = {2026},
volume = {2},
number = {2},
pages = {76--101},
doi = {10.67419/jyi.v2i2.19}
}
EUVIMED