EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Hybrid Nanofluid Composition on Surface Roughness and Hardness During Roller Burnishing of Aluminum Alloys

Balaji Murarikar, Vishal Chahare

International Research Journal of Innovation in Science and Technology · 2026

DOI: 10.67308/irjsit.071 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Research Journal of Innovation in Science and Technology, 2026. Verfasst von Balaji Murarikar und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid nanofluids, formed by combining two different nanoparticles in a single base fluid, have gained attention for their enhanced lubrication and heat-transfer capabilities. However, the performance of such fluids is strongly influenced by the nanoparticle composition ratio, while most previous studies have employed a fixed 50:50 mixture. This study investigates the effect of hybrid nanofluid composition on surface roughness (Ra) and microhardness (HV) during roller burnishing of Al6061-T6, Al7075-T6, and Al2024-T3 aluminum alloys. Four hybrid nanofluid systems, namely Al₂O₃-CuO, Al₂O₃-TiO₂, Al₂O₃-graphene, and CuO-MWCNT, were prepared using deionized water at a constant nanoparticle concentration of 1.0 wt.%. Five composition ratios ranging from 100:0 to 0:100 were evaluated under identical burnishing conditions. The results showed that the optimum composition varied with the hybrid pair and generally differed from the commonly used 50:50 ratio. Among the investigated formulations, the Al₂O₃-graphene hybrid achieved the lowest surface roughness (Ra = 0.58 μm on Al7075-T6), while the Al₂O₃-CuO hybrid produced the highest microhardness (156 HV). The optimum compositions were identified as 75:25 for Al₂O₃-CuO, 60:40 for Al₂O₃-TiO₂, 60:40 for Al₂O₃-graphene, and 50:50 for CuO-MWCNT. The findings highlight the importance of composition optimization in improving surface integrity during hybrid nanofluid-assisted roller burnishing.

Zitieren

APA

Murarikar, B., & Chahare, V. (2026). Influence of Hybrid Nanofluid Composition on Surface Roughness and Hardness During Roller Burnishing of Aluminum Alloys. International Research Journal of Innovation in Science and Technology. https://doi.org/10.67308/irjsit.071

Vancouver

Murarikar B, Chahare V. Influence of Hybrid Nanofluid Composition on Surface Roughness and Hardness During Roller Burnishing of Aluminum Alloys. International Research Journal of Innovation in Science and Technology. 2026. doi:10.67308/irjsit.071

BibTeX
@article{Murarikar2026,
  author = {Murarikar, Balaji and Chahare, Vishal},
  title = {Influence of Hybrid Nanofluid Composition on Surface Roughness and Hardness During Roller Burnishing of Aluminum Alloys},
  journal = {International Research Journal of Innovation in Science and Technology},
  year = {2026},
  doi = {10.67308/irjsit.071}
}
Kostenlos starten →