EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Surface Roughness Optimization in Hard Turning of AISI D2 Steel Using RSM and Machine Learning

Mauli Sudake, Aditya Pujari, Avinash Somatkar, Vishal Chahare

International Research Journal of Innovation in Science and Technology · 22.04.2026 · 1 (2) · 8-15

DOI: 10.67308/irjist.010 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Research Journal of Innovation in Science and Technology, online erschienen am 22.04.2026. Verfasst von Mauli Sudake und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultra-precision hard turning of hardened steels offers a promising alternative to grinding for achieving high surface quality; however, predicting surface roughness remains challenging due to complex parameter interactions. This study investigates the prediction and optimization of surface roughness (Ra) in hard turning of AISI D2 steel (62 HRC) using a cubic boron nitride (CBN) tool. Experiments were conducted by varying cutting speed, feed rate, and depth of cut under controlled conditions. Response Surface Methodology (RSM) was used to model and optimize the process, while machine learning models including Support Vector Machine (SVM), Artificial Neural Network (ANN), Gaussian Process Regression (GPR), and Adaptive Neuro-Fuzzy Inference System (ANFIS) were developed for prediction. Model performance was evaluated using R, RMSE, and MAPE. Results indicate that feed rate is the most significant factor affecting surface roughness, followed by cutting speed, while depth of cut has minimal influence. Among the models, ANFIS achieved the highest accuracy (R = 0.81, RMSE = 0.17). Optimal conditions (Vc = 100 m/min, f = 0.025 mm/rev, ap = 0.09 mm) yielded a minimum surface roughness of 0.207 µm. The integration of RSM and machine learning provides an effective and reliable framework for accurate prediction and optimization in ultra-precision hard turning.

Zitieren

APA

Sudake, M., Pujari, A., Somatkar, A., & Chahare, V. (2026). Surface Roughness Optimization in Hard Turning of AISI D2 Steel Using RSM and Machine Learning. International Research Journal of Innovation in Science and Technology, 1(2), 8-15. https://doi.org/10.67308/irjist.010

Vancouver

Sudake M, Pujari A, Somatkar A, Chahare V. Surface Roughness Optimization in Hard Turning of AISI D2 Steel Using RSM and Machine Learning. International Research Journal of Innovation in Science and Technology. 2026;1(2):8-15. doi:10.67308/irjist.010

BibTeX
@article{Sudake2026,
  author = {Sudake, Mauli and Pujari, Aditya and Somatkar, Avinash and Chahare, Vishal},
  title = {Surface Roughness Optimization in Hard Turning of AISI D2 Steel Using RSM and Machine Learning},
  journal = {International Research Journal of Innovation in Science and Technology},
  year = {2026},
  volume = {1},
  number = {2},
  pages = {8--15},
  doi = {10.67308/irjist.010}
}
Kostenlos starten →