The flexural behavior of RC beams strengthened by near-surface mounted steel or FRP bars is investigated experimentally and numerically
ENGINOM in Engineering Innovations · 01.05.2026 · 1 (1)
DOI: 10.66632/eei-2026-26 ↗Kurz gefasst
Fachartikel in der Zeitschrift ENGINOM in Engineering Innovations, online erschienen am 01.05.2026. Verfasst von Ahmed Ali. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
The near-surface mounted (NSM) method, which involves attaching strips or rods in grooves made inside the concrete cover with an adhesive, has been shown to be efficient in strengthening because of the bonding area it offers and its capacity to delaying debonding. The flexural behavior of reinforced concrete (RC) beams strengthened with steel and fiber reinforced polymer FRP bars was experimentally investigated. Four RC beams were casted and tested under four points loads. The effect of bars types was studied represented in steel, glass-FRP (GFRP), and carbon-FRP (CFRP). The load capacity, deflection, failure modes, crack patterns, stiffness, toughness, and ductility of the tested RC beams were collected and analyzed. Enhancing for beam strengthened with NSM steel, GFRP, and CFRP bar in carrying load with 60.6, 72.6, and 81.1% and in yielding loads 78.1, 45.3, and 82.8% respectively over the control beam (CB)..
Zitieren
APA
Ali, A. (2026). The flexural behavior of RC beams strengthened by near-surface mounted steel or FRP bars is investigated experimentally and numerically. ENGINOM in Engineering Innovations, 1(1). https://doi.org/10.66632/eei-2026-26
Vancouver
Ali A. The flexural behavior of RC beams strengthened by near-surface mounted steel or FRP bars is investigated experimentally and numerically. ENGINOM in Engineering Innovations. 2026;1(1). doi:10.66632/eei-2026-26
BibTeX
@article{Ali2026,
author = {Ali, Ahmed},
title = {The flexural behavior of RC beams strengthened by near-surface mounted steel or FRP bars is investigated experimentally and numerically},
journal = {ENGINOM in Engineering Innovations},
year = {2026},
volume = {1},
number = {1},
doi = {10.66632/eei-2026-26}
}
EUVIMED