EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Sensitivity Analysis of Key Mechanical Parameters in the Uniaxial Compressive Strength Test Using Numerical Simulation

Gholam Ali Rahmani, Zaman Nihzat, Mohammad Jawad Jahed

Afghan International Journal of Science · 31.12.2025 · 1 (1) · 89-105

DOI: 10.66546/aijs.v1i1.13 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Afghan International Journal of Science, online erschienen am 31.12.2025. Verfasst von Gholam Ali Rahmani und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Predicting the mechanical behavior of rocks under loading is crucial for stability analyses and the design of underground and mining structures. A primary challenge lies in identifying and quantifying the influence of Geomechanical parameters on ultimate strength and failure mechanisms. In this study, a parametric sensitivity analysis was conducted to assess the effects of four key parameters—loading rate, friction angle, cohesion, and Young's modulus—on rock behavior under compressive loading. Numerical simulations were performed by varying each parameter independently while keeping the others constant. Results indicate that increasing the loading rate enhances the peak strength. The ultimate strength is primarily governed by cohesion and the friction angle, whereas Young's modulus affects only stiffness and the slope of the elastic portion of the stress–strain curve, without influencing peak strength. All specimens exhibited post-peak softening, with failure characterized by progressive development of shear zones and fracture surfaces. Cohesion was found to exert a more substantial influence on ultimate strength than the friction angle.

Zitieren

APA

Rahmani, G. A., Nihzat, Z., & Jahed, M. J. (2025). Sensitivity Analysis of Key Mechanical Parameters in the Uniaxial Compressive Strength Test Using Numerical Simulation. Afghan International Journal of Science, 1(1), 89-105. https://doi.org/10.66546/aijs.v1i1.13

Vancouver

Rahmani GA, Nihzat Z, Jahed MJ. Sensitivity Analysis of Key Mechanical Parameters in the Uniaxial Compressive Strength Test Using Numerical Simulation. Afghan International Journal of Science. 2025;1(1):89-105. doi:10.66546/aijs.v1i1.13

BibTeX
@article{Rahmani2025,
  author = {Rahmani, Gholam Ali and Nihzat, Zaman and Jahed, Mohammad Jawad},
  title = {Sensitivity Analysis of Key Mechanical Parameters in the Uniaxial Compressive Strength Test Using Numerical Simulation},
  journal = {Afghan International Journal of Science},
  year = {2025},
  volume = {1},
  number = {1},
  pages = {89--105},
  doi = {10.66546/aijs.v1i1.13}
}
Kostenlos starten →