Effect of Oxygen Flow During Sintering on the Structural, Superconducting and Microstructural Properties of YBa2Cu3O7-δ
Solid State Science and Technology · 01.12.2025 · 33 (2) · 149-160
DOI: 10.66514/ssst332-149-160 ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Science and Technology, online erschienen am 01.12.2025. Verfasst von Nur Athirah Che Dzul-Kifli und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
The oxygen content in YBa₂Cu₃O7-δ (YBCO-123) plays a critical role in determining its structural and superconducting properties. In this work, the effect of oxygen flow during the sintering process on the structural, superconducting and microstructural characteristics of pure YBCO-123 was investigated. Samples were prepared using the conventional solid-state reaction method under identical thermal conditions, with and without oxygen flow during sintering. Phase formation and crystal structure were examined using X-ray diffraction (XRD), superconducting behavior was evaluated by AC magnetic susceptibility (ACS) and microstructural features were analyzed using field emission scanning electron microscopy (FESEM). XRD results confirmed that orthorhombic YBCO-123 was the dominant phase for both sintering conditions, with a small amount of Y₂BaCuO₅ (Y-211) secondary phase present. While phase composition differences were minimal, ACS measurement revealed that samples sintered with oxygen flow exhibited a higher superconducting transition temperature and a sharper transition, indicating improved oxygen incorporation and enhanced intergranular coupling. FESEM analysis showed that oxygen-assisted sintering promoted grain growth, improved grain connectivity and reduced porosity. These findings demonstrate that oxygen flow effectively enhances the superconducting and microstructural properties of pure YBCO-123 which highlighting the importance of controlled oxygen environments during thermal processing.
Zitieren
APA
Dzul-Kifli, N. A. C., Kechik, M. M. A., Chen, S. K., Lim, K. P., Shaari, A. H., Shabdin, M. K., Yaacob, Y., Zaid, M. H. M., Yap, S. H., & Yap, S. H. (2025). Effect of Oxygen Flow During Sintering on the Structural, Superconducting and Microstructural Properties of YBa2Cu3O7-δ. Solid State Science and Technology, 33(2), 149-160. https://doi.org/10.66514/ssst332-149-160
Vancouver
Dzul-Kifli NAC, Kechik MMA, Chen SK, Lim KP, Shaari AH, Shabdin MK, et al. Effect of Oxygen Flow During Sintering on the Structural, Superconducting and Microstructural Properties of YBa2Cu3O7-δ. Solid State Science and Technology. 2025;33(2):149-160. doi:10.66514/ssst332-149-160
BibTeX
@article{DzulKifli2025,
author = {Dzul-Kifli, Nur Athirah Che and Kechik, Mohd Mustafa Awang and Chen, Soo Kien and Lim, Kean Pah and Shaari, Abdul Halim and Shabdin, Muhammad Kashfi and Yaacob, Yazid and Zaid, Mohd Hafiz Mohd and Yap, Siew Hong and Yap, Siew Hong},
title = {Effect of Oxygen Flow During Sintering on the Structural, Superconducting and Microstructural Properties of YBa2Cu3O7-δ},
journal = {Solid State Science and Technology},
year = {2025},
volume = {33},
number = {2},
pages = {149--160},
doi = {10.66514/ssst332-149-160}
}
EUVIMED