EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Modelling and Simulation of Multistep Constant Current Fast Charging for Lithium-Ion Batteries Using a PID Controlled Synchronous Buck Converter

Monika Fahmi, Deni Tri Laksono, Dedi Tri Laksono

Journal of Renewable Energy and Smart Device · 29.04.2026 · 129-147

DOI: 10.66314/joresd.v3i2.708 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Renewable Energy and Smart Device, online erschienen am 29.04.2026. Verfasst von Monika Fahmi und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-current fast charging of lithium-ion batteries in electric motorcycles is challenged by current instability, voltage overshoot, and accelerated degradation caused by nonlinear electrochemical and thermal dynamics. Conventional single-stage buck converters exhibit limited capability in maintaining precise current regulation across wide state-of-charge (SoC) variations, thereby constraining both efficiency and operational safety. This study proposes a novel adaptive multistep constant-current (MS-CC) fast charging framework specifically tailored for electric motorcycle applications, implemented using a PID-controlled synchronous buck converter. Unlike existing MS-CC approaches, the proposed method introduces a unified control architecture that dynamically schedules five discrete current levels based on real-time voltage thresholds, enabling seamless transition between charging stages without inducing transient spikes. The system is modeled and validated in MATLAB/Simulink, with PID parameters tuned via the Ziegler–Nichols closed-loop method. Simulation results show that the charging current accurately tracks its reference within 0.25% across all stages, with negligible overshoot and stable transient performance. From a practical standpoint, the proposed strategy aligns with the operational constraints of electric motorcycles, such as compact onboard chargers, limited thermal management capacity, and frequent fast-charging cycles. Furthermore, the method reduces switching and conduction losses, mitigates thermal stress, and enhances overall charging efficiency while preserving electrochemical stability. These findings demonstrate that the proposed MS-CC control scheme not only advances the state-of-the-art in charging control strategies but also provides a viable, implementation-ready solution for next-generation electric motorcycle charging systems.

Zitieren

APA

Fahmi, M., Laksono, D. T., & Laksono, D. T. (2026). Modelling and Simulation of Multistep Constant Current Fast Charging for Lithium-Ion Batteries Using a PID Controlled Synchronous Buck Converter. Journal of Renewable Energy and Smart Device, 129-147. https://doi.org/10.66314/joresd.v3i2.708

Vancouver

Fahmi M, Laksono DT, Laksono DT. Modelling and Simulation of Multistep Constant Current Fast Charging for Lithium-Ion Batteries Using a PID Controlled Synchronous Buck Converter. Journal of Renewable Energy and Smart Device. 2026:129-147. doi:10.66314/joresd.v3i2.708

BibTeX
@article{Fahmi2026,
  author = {Fahmi, Monika and Laksono, Deni Tri and Laksono, Dedi Tri},
  title = {Modelling and Simulation of Multistep Constant Current Fast Charging for Lithium-Ion Batteries Using a PID Controlled Synchronous Buck Converter},
  journal = {Journal of Renewable Energy and Smart Device},
  year = {2026},
  pages = {129--147},
  doi = {10.66314/joresd.v3i2.708}
}
Kostenlos starten →