Design and Calibration of Water Quality Monitoring System Based on Internet of Things
Journal of Renewable Energy and Smart Device · 19.04.2026 · 13-26
DOI: 10.66314/joresd.v3i2.429 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Renewable Energy and Smart Device, online erschienen am 19.04.2026. Verfasst von Basino und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
Real-time water quality monitoring is crucial for modern aquaculture. However, low-cost Internet of Things (IoT) systems frequently struggle with analog sensor precision due to the limitations of internal microcontrollers. This study presents the design, calibration, and performance evaluation of a highly precise IoT-based water quality monitoring system. The hardware architecture utilizes NodeMCU ESP-32 microcontroller integrated with an external ADS1115 16-bit Analog-to-Digital Converter (ADC) module. This integration effectively mitigates signal noise and accurately processes analog inputs. The system continuously measures temperature using a DS18B20 sensor, alongside pH, Dissolved Oxygen (DO), and Total Dissolved Solids (TDS). To ensure industrial-grade reliability, rigorous sensor calibration was executed using linear regression and standard buffer solutions prior to deployment. A 14-day comparative field test was then conducted against calibrated commercial handheld instruments to validate the system's accuracy. The statistical evaluation demonstrated exceptional precision, yielding minimal average measurement errors of 0.08°C for temperature, 0.35 for pH, 0.24 mg/L for DO, and 6.80 ppm for TDS. Furthermore, linear regression analysis confirmed highly robust data correlations between the IoT sensors and the standard devices. The system achieved coefficient of determination ($R^2$) values of 0.9928 for the temperature sensor, 0.8906 for pH, 0.9962 for DO, and 0.7656 for TDS. These results mathematically confirm that integrating an external high-resolution ADC alongside comprehensive statistical calibration significantly enhances measurement stability. Ultimately, this approach successfully elevates the precision of low-cost IoT monitoring systems for aquaculture applications.
Zitieren
APA
Basino, Zainun, R., Wibowo, B., Saputra, R. S. H., Daging, I. K., Syam, Y., Syarifudin, A., & Hermawan, A. (2026). Design and Calibration of Water Quality Monitoring System Based on Internet of Things. Journal of Renewable Energy and Smart Device, 13-26. https://doi.org/10.66314/joresd.v3i2.429
Vancouver
Basino, Zainun R, Wibowo B, Saputra RSH, Daging IK, Syam Y, et al. Design and Calibration of Water Quality Monitoring System Based on Internet of Things. Journal of Renewable Energy and Smart Device. 2026:13-26. doi:10.66314/joresd.v3i2.429
BibTeX
@article{Basino2026,
author = {Basino and Zainun, Rafif and Wibowo, Berbudi and Saputra, Rahmad Surya Hadi and Daging, I Ketut and Syam, Yusuf and Syarifudin, Akhmad and Hermawan, Ade},
title = {Design and Calibration of Water Quality Monitoring System Based on Internet of Things},
journal = {Journal of Renewable Energy and Smart Device},
year = {2026},
pages = {13--26},
doi = {10.66314/joresd.v3i2.429}
}
EUVIMED