STUDY OF THE EFFECT OF PRELIMINARY ULTRASONIC SURFACE MODIFICATION OF TI-6AL-4V ALLOY SUBSTRATE ON THE FORMATION OF A NITRIDED LAYER
Journal of Surface Engineering and Coating Technology · 09.02.2026 · 4
DOI: 10.66310/zeed5485 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Surface Engineering and Coating Technology, online erschienen am 09.02.2026. Verfasst von Zarina Aringozhina und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
This study examined how ultrasonic nanocrystalline surface modification (UNSM) influences the formation of nitride layers in Ti-6Al-4V alloy during ion-plasma nitriding (IPN). We systematically varied UNSM parameters-specifically vibration amplitude, static load, and processing temperature-to assess their impact on the material's microstructure, hardness, elastic modulus, and tribological behavior. Our findings indicate that an optimized UNSM pre-treatment significantly boosts nitrogen diffusion, resulting in the creation of dense and uniform TiN/Ti₂N layers. Notably, samples subjected to UNSM under high-load and elevated-temperature conditions showed the most substantial improvements. These included a surface hardness increase of up to 25%, an elastic modulus rise of up to 18%, and enhanced wear resistance with a more stable and reduced friction coefficient (around 0.55). Further scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses corroborated these results by confirming microstructural densification, grain refinement, and a heightened intensity of nitride phases. These findings underscore the scientific value and practical applicability of UNSM as an effective surface activation method. Consequently, the hybrid UNSM + IPN approach emerges as a promising strategy for prolonging the service life of critical load-bearing components like biomedical implants and other engineering parts exposed to severe wear.
Förderung
- Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Aringozhina, Z., Magazov, N., Amanov, A., Askhatov, A., & Batanov, E. (2026). STUDY OF THE EFFECT OF PRELIMINARY ULTRASONIC SURFACE MODIFICATION OF TI-6AL-4V ALLOY SUBSTRATE ON THE FORMATION OF A NITRIDED LAYER. Journal of Surface Engineering and Coating Technology, 4. https://doi.org/10.66310/zeed5485
Vancouver
Aringozhina Z, Magazov N, Amanov A, Askhatov A, Batanov E. STUDY OF THE EFFECT OF PRELIMINARY ULTRASONIC SURFACE MODIFICATION OF TI-6AL-4V ALLOY SUBSTRATE ON THE FORMATION OF A NITRIDED LAYER. Journal of Surface Engineering and Coating Technology. 2026:4. doi:10.66310/zeed5485
BibTeX
@article{Aringozhina2026,
author = {Aringozhina, Zarina and Magazov, Nurtoleu and Amanov, Auezhan and Askhatov, Arnur and Batanov, Elaman},
title = {STUDY OF THE EFFECT OF PRELIMINARY ULTRASONIC SURFACE MODIFICATION OF TI-6AL-4V ALLOY SUBSTRATE ON THE FORMATION OF A NITRIDED LAYER},
journal = {Journal of Surface Engineering and Coating Technology},
year = {2026},
pages = {4},
doi = {10.66310/zeed5485}
}
EUVIMED