EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

EFFECT OF ARGON FLOW RATE DURING AIR PLASMA SPRAYING ON THE STRUCTURE AND PROPERTIES OF NICRFEBSIC COATINGS

Dastan Buitkenov, Nurkhat Bimakhan, Nurmahanbet Raisov

Journal of Surface Engineering and Coating Technology · 24.06.2026 · 76

DOI: 10.66310/fgfl9624 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Surface Engineering and Coating Technology, online erschienen am 24.06.2026. Verfasst von Dastan Buitkenov und 2 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this work, self-fluxing metal-ceramic coatings based on the NiCrFeBSiC system were obtained by air plasma spraying, and their structural, mechanical, and tribological properties were investigated.. The effect of argon flow rate (1600 and 1800 L/h) during coating formation was consideredIt was found that an increase in argon flow rate leads to an approximately twofold increase in coating thickness and a twofold decrease in porosity. According to the microhardness measurement results, the microhardness was 1015.8 ± 81.5 HV, while the elastic modulus was 203.9 ± 5.4 GPa. Tribological tests were carried out using the ball-on-disk configurationAt an argon flow rate of 1800 L/h, the friction coefficient showed a lower value (≈0.107), indicating improved wear resistance of the coatings. Scratch test results showed a high level of adhesion between the coatings and the substrate. Although the critical load values (Lc) were similar for both regimes, the coatings obtained at 1800 L/h exhibited a more gradual and stable failure behavior.

Zitieren

APA

Buitkenov, D., Bimakhan, N., & Raisov, N. (2026). EFFECT OF ARGON FLOW RATE DURING AIR PLASMA SPRAYING ON THE STRUCTURE AND PROPERTIES OF NICRFEBSIC COATINGS. Journal of Surface Engineering and Coating Technology, 76. https://doi.org/10.66310/fgfl9624

Vancouver

Buitkenov D, Bimakhan N, Raisov N. EFFECT OF ARGON FLOW RATE DURING AIR PLASMA SPRAYING ON THE STRUCTURE AND PROPERTIES OF NICRFEBSIC COATINGS. Journal of Surface Engineering and Coating Technology. 2026:76. doi:10.66310/fgfl9624

BibTeX
@article{Buitkenov2026,
  author = {Buitkenov, Dastan and Bimakhan, Nurkhat and Raisov, Nurmahanbet},
  title = {EFFECT OF ARGON FLOW RATE DURING AIR PLASMA SPRAYING ON THE STRUCTURE AND PROPERTIES OF NICRFEBSIC COATINGS},
  journal = {Journal of Surface Engineering and Coating Technology},
  year = {2026},
  pages = {76},
  doi = {10.66310/fgfl9624}
}
Kostenlos starten →