EFFECTS OF MATERIAL AND GEOMETRY ON COMPOSITE MATERIAL BEHAVIOR UNDER COMPRESSION
Journal of Science and Engineering Applications · 30.09.2023 · 5 (1)
DOI: 10.66262/jsea.10035 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Science and Engineering Applications, online erschienen am 30.09.2023. Verfasst von Zeid Albahash und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The use of light, cheap natural fibres instead of heavy ,expensive materials can reduce noise, increase strength, and reduce fuel consumption in automotive application. This research explores the potential for gradually replacing metallic materials with natural and hybrid fiber . The simplest and common technique hand layup is utilized to study the performance of fiber reinforced epoxy composite tubes under static compression to investigate the effect of using hybrid fibers on the failure mechanism. This study investigates the effects on stress and strain using different types of fibers after determining the tube load-displacement curves. A total of 24 samples are prepared at room temperature and tested at a constant speed of 1.5 mm/s using one resin type (epoxy) and two fiber types (Kevlar, jute). Two circular and square geometries of three heights (200mm, 250mm, 300mm), two circular diameters and two square sides are used to investigate the crashworthiness parameters. Replacing two layers of Kevlar fiber by two layers of natural jute fiber enhanced the crash worthiness parameters particularly, failure type. The hybrid jute / Kevlar accomplished desirable results, especially the circular tube.
Zitieren
APA
Albahash, Z., Alasadi, A., & Mohsin, A. (2023). EFFECTS OF MATERIAL AND GEOMETRY ON COMPOSITE MATERIAL BEHAVIOR UNDER COMPRESSION. Journal of Science and Engineering Applications, 5(1). https://doi.org/10.66262/jsea.10035
Vancouver
Albahash Z, Alasadi A, Mohsin A. EFFECTS OF MATERIAL AND GEOMETRY ON COMPOSITE MATERIAL BEHAVIOR UNDER COMPRESSION. Journal of Science and Engineering Applications. 2023;5(1). doi:10.66262/jsea.10035
BibTeX
@article{Albahash2023,
author = {Albahash, Zeid and Alasadi, Ali and Mohsin, Ameer},
title = {EFFECTS OF MATERIAL AND GEOMETRY ON COMPOSITE MATERIAL BEHAVIOR UNDER COMPRESSION},
journal = {Journal of Science and Engineering Applications},
year = {2023},
volume = {5},
number = {1},
doi = {10.66262/jsea.10035}
}
EUVIMED