EUVIMEDEUVIMED entdecken
Crossref

Study And Evaluation of The Active Material Used In The Manufacture Of Lithium-Ion Cell Cathode

Tareq Shlash Al-Abdullah, Dr. Ahmed Abo Hjer, Dr. Mohammed Wael Al-Khaled

Research Journal of Idlib University · 2025 · 8 (1) · 533-559

DOI: 10.66247/a07qwn73 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Research Journal of Idlib University, 2025. Verfasst von Tareq Shlash Al-Abdullah und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to evaluate the performance of three commonly used cathode materials in lithium-ion batteries and to identify the behavior and effects of these materials: lithium-cobalt oxide (LiCoO2)-LCO, lithium-manganese-nickel cobalt oxide (LiNiMnCoO2) NMC532 and lithium iron phosphate LFP (LiFePO4). The electrical and chemical properties of these materials were evaluated in this research by analyzing the capacity, energy efficiency and performance stability. The results show that LFP provides stable and good long-term performance, but the prevailing voltage is not large, not exceeding 3.3-3.2 V, while LCO records higher energy with a voltage of 4 V, but its stability may decrease over time, while NMC532 shows a good balance between capacity and longevity and high values for the voltage of 4.19 V. The first charge was very stable for cells manufactured using LCO, and the study concluded that the NMC532 formulation is a marketable product. The results showed that LFP provides high stability in long-term performance, while LCO recorded the highest capacity, while NMC532 shows an ideal balance between capacity and longevity. It also indicates that the specific capacity of (LCO) was the highest at 210 mAh/gr, while NMC532 was average at 188 mAh/g, while LiFePO4 showed a specific capacity of about 157 mAh/g with greater stability in repeated cycles

Zitieren

APA

Al-Abdullah, T. S., Hjer, D. A. A., & Al-Khaled, D. M. W. (2025). Study And Evaluation of The Active Material Used In The Manufacture Of Lithium-Ion Cell Cathode. Research Journal of Idlib University, 8(1), 533-559. https://doi.org/10.66247/a07qwn73

Vancouver

Al-Abdullah TS, Hjer DAA, Al-Khaled DMW. Study And Evaluation of The Active Material Used In The Manufacture Of Lithium-Ion Cell Cathode. Research Journal of Idlib University. 2025;8(1):533-559. doi:10.66247/a07qwn73

BibTeX
@article{AlAbdullah2025,
  author = {Al-Abdullah, Tareq Shlash and Hjer, Dr. Ahmed Abo and Al-Khaled, Dr. Mohammed Wael},
  title = {Study And Evaluation of The Active Material Used In The Manufacture Of Lithium-Ion Cell Cathode},
  journal = {Research Journal of Idlib University},
  year = {2025},
  volume = {8},
  number = {1},
  pages = {533--559},
  doi = {10.66247/a07qwn73}
}
Kostenlos starten →