EUVIMEDEUVIMED entdecken
Crossref

Mechanical Behavior of a Sierpiński Triangle – Inspired Construction

Mateusz Rudnik

Mechatronics and Mechanical Engineering · 04.01.2026 · 1

DOI: 10.66176/mandme0002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mechatronics and Mechanical Engineering, online erschienen am 04.01.2026. Verfasst von Mateusz Rudnik.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigated selected mechanical properties of Sierpiński-based structures subjected to static compression loading. Four geometric iterations (1IT – 4IT) were designed and manufactured using the MEX (Material Extrusion) process with a FlSun V400 3D printer and PLA+ material, and tested in three printing orientations (0°, 45°, and 90°). The experimental results were presented using column charts, enabling direct comparison of the effects of geometric iteration and printing orientation on the mechanical response of the specimens. The analysis demonstrated that geometric iteration was the dominant factor governing mechanical behavior. Fully solid specimens (1IT) exhibited the highest load – carrying capacity and energy absorption, reaching a maximum compressive force of approximately 35.1 kN and work values of up to about 868 J. The introduction of internal voids in porous configurations (2IT – 4IT) led to a substantial reduction in maximum force, displacement at peak load, and absorbed energy, reg

Zitieren

APA

Rudnik, M. (2026). Mechanical Behavior of a Sierpiński Triangle – Inspired Construction. Mechatronics and Mechanical Engineering, 1. https://doi.org/10.66176/mandme0002

Vancouver

Rudnik M. Mechanical Behavior of a Sierpiński Triangle – Inspired Construction. Mechatronics and Mechanical Engineering. 2026:1. doi:10.66176/mandme0002

BibTeX
@article{Rudnik2026,
  author = {Rudnik, Mateusz},
  title = {Mechanical Behavior of a Sierpiński Triangle – Inspired Construction},
  journal = {Mechatronics and Mechanical Engineering},
  year = {2026},
  pages = {1},
  doi = {10.66176/mandme0002}
}
Kostenlos starten →