EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CLEANER PRODUCTION IN AN AUTOMOTIVE SHEET MOLDING COMPOUND MANUFACTURING PROCESS: AN INDUSTRIAL CASE STUDY ON EDGE WASTE PREVENTION

Marcelo Dias Guerra, Kamila Kazmierczak, Cleide Vieira, Fernanda Hänsch Beuren, Caroline Rodrigues Vaz, Alexandre Borges Fagundes

REMUNOM · 29.07.2026 · 13 (17) · 1-17

DOI: 10.66104/w07zew14 ↗

Kurz gefasst

Fachartikel in der Zeitschrift REMUNOM, online erschienen am 29.07.2026. Verfasst von Marcelo Dias Guerra und 5 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study describes a Level 1 Cleaner Production (CP) intervention implemented in an automotive Sheet Molding Compound (SMC) process in southern Brazil. An analysis of the annual pre-intervention production base of 1,247,327 kg identified an edge-loss rate of 8.7%, corresponding to 108,463.22 kg of material associated with manual edge trimming. The intervention consisted of deactivating five fiber feed tubes and installing four metal plates to prevent fiber buildup in the edge zone. According to company records, the revised configuration removed the operational need for manual trimming of this specific edge-waste stream. The study established a gross annual baseline of R$ 1,132,629.13 in avoidable raw-material and waste-management losses associated with the pre-intervention edge-waste flow. This amount does not represent net savings or a payback estimate because investment and maintenance costs were not available for disclosure. The study does not report post-intervention time-series data, disclosable numerical quality-test results, or life-cycle impacts. It documents a case-specific source-prevention intervention and its limitations under industrial confidentiality conditions.

Zitieren

APA

Guerra, M. D., Kazmierczak, K., Vieira, C., Beuren, F. H., Vaz, C. R., & Fagundes, A. B. (2026). CLEANER PRODUCTION IN AN AUTOMOTIVE SHEET MOLDING COMPOUND MANUFACTURING PROCESS: AN INDUSTRIAL CASE STUDY ON EDGE WASTE PREVENTION. REMUNOM, 13(17), 1-17. https://doi.org/10.66104/w07zew14

Vancouver

Guerra MD, Kazmierczak K, Vieira C, Beuren FH, Vaz CR, Fagundes AB. CLEANER PRODUCTION IN AN AUTOMOTIVE SHEET MOLDING COMPOUND MANUFACTURING PROCESS: AN INDUSTRIAL CASE STUDY ON EDGE WASTE PREVENTION. REMUNOM. 2026;13(17):1-17. doi:10.66104/w07zew14

BibTeX
@article{Guerra2026,
  author = {Guerra, Marcelo Dias and Kazmierczak, Kamila and Vieira, Cleide and Beuren, Fernanda Hänsch and Vaz, Caroline Rodrigues and Fagundes, Alexandre Borges},
  title = {CLEANER PRODUCTION IN AN AUTOMOTIVE SHEET MOLDING COMPOUND MANUFACTURING PROCESS: AN INDUSTRIAL CASE STUDY ON EDGE WASTE PREVENTION},
  journal = {REMUNOM},
  year = {2026},
  volume = {13},
  number = {17},
  pages = {1--17},
  doi = {10.66104/w07zew14}
}
Kostenlos starten →