Slag Composition Control Indices in High-Temperature Metallurgy: A Critical Review of Viscosity, Conductivity, Corrosion, and Refractory Wear
Journal International Review of Research Studies · 05.10.2026 · 1 (04 - April)
DOI: 10.66104/7x5etg23 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal International Review of Research Studies, online erschienen am 05.10.2026. Verfasst von Antonio Clareti Pereira. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 155 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Metallurgical slag control is frequently reduced to one-dimensional composition indices, although industrial performance emerges from a coupled thermochemical state governed by melt structure, transport, phase stability, interfacial reactivity, refractory degradation, and process history. This critical review evaluates the physical meaning, calculation basis, calibration domain, and transferability of binary and extended basicity, optical basicity, structural descriptors, viscosity models, electrical-conductivity correlations, saturation and liquidus criteria, and data-driven approaches. Across the reviewed evidence, no single scalar index uniquely identifies the operating state of a multicomponent slag because temperature, redox state, amphoteric behavior, minor oxides, crystallization, solid fraction, and thermal history can alter property responses without changing the nominal index. Viscosity is the most extensively modeled property, whereas conductivity, corrosivity, and refractory wear are less consistently represented and are seldom incorporated into the same control logic. Cross-process comparison further indicates that indices calibrated for blast-furnace, mold-flux, gasification, copper-smelting, or refining slags should not be transferred without verifying compatibility in chemistry, thermal behavior, redox state, phase state, measurement method, and process history. The review therefore proposes a multi-property control framework that combines composition descriptors with thermodynamic phase state, structural metrics, property models, uncertainty bounds, and process-specific validation. This framework reframes slag control from fixed basicity targets toward dynamic state estimation and multi-objective operating windows supported by online sensing, CALPHAD-based calculations, structural models, and interpretable machine learning.
Zitieren
APA
Pereira, A. C. (2026). Slag Composition Control Indices in High-Temperature Metallurgy: A Critical Review of Viscosity, Conductivity, Corrosion, and Refractory Wear. Journal International Review of Research Studies, 1(04 - April). https://doi.org/10.66104/7x5etg23
Vancouver
Pereira AC. Slag Composition Control Indices in High-Temperature Metallurgy: A Critical Review of Viscosity, Conductivity, Corrosion, and Refractory Wear. Journal International Review of Research Studies. 2026;1(04 - April). doi:10.66104/7x5etg23
BibTeX
@article{Pereira2026,
author = {Pereira, Antonio Clareti},
title = {Slag Composition Control Indices in High-Temperature Metallurgy: A Critical Review of Viscosity, Conductivity, Corrosion, and Refractory Wear},
journal = {Journal International Review of Research Studies},
year = {2026},
volume = {1},
number = {04 - April},
doi = {10.66104/7x5etg23}
}
EUVIMED