Numerical Homogenization of Concrete Reinforced with Aluminum Powder Based on the Mori Tanaka Method
Journal International Review of Research Studies · 05.07.2026 · 1 (09) · 1-11
DOI: 10.66104/4eat5r11 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal International Review of Research Studies, online erschienen am 05.07.2026. Verfasst von Abdelmoutalib Benfrid und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
This study investigates the effective elastic behavior of concrete reinforced with aluminum powder using a numerical homogenization approach based on the Mori-Tanaka method. The objective is to predict the influence of aluminum powder volume fraction on the effective Young's modulus and Poisson's ratio of the composite material under linear elastic assumptions. A numerical model implemented in Python is developed to calculate the effective bulk and shear moduli of the reinforced concrete and to derive the corresponding homogenized elastic properties. The results indicate a progressive increase in the effective Young's modulus as the aluminum powder content increases from 0% to 30%. The predicted Young's modulus rises from 20 GPa for plain concrete to approximately 30.74 GPa at 30% reinforcement volume fraction, corresponding to an increase of about 53.7%. This stiffness enhancement is mainly attributed to the higher elastic modulus of the aluminum phase and to its contribution to the effective bulk and shear response of the composite. In contrast, a slight decrease in the effective Poisson's ratio is observed with increasing reinforcement content, reflecting the modification of the elastic response of the composite system. Within the investigated numerical range, the highest predicted elastic stiffness is obtained at 30% aluminum powder volume fraction. However, this value should not be interpreted as a definitive experimental or structural optimum, since the model does not account for workability, porosity, particle agglomeration, imperfect bonding, microcracking, creep, fatigue, durability, or possible chemical interactions between aluminum powder and the cementitious matrix. Therefore, the proposed approach should be considered as a preliminary numerical screening tool for estimating effective elastic properties. Future experimental validation is required before practical structural application.
Zitieren
APA
Benfrid, A., Murawski, K., Khatib, M., & Boukhari, A. (2026). Numerical Homogenization of Concrete Reinforced with Aluminum Powder Based on the Mori Tanaka Method. Journal International Review of Research Studies, 1(09), 1-11. https://doi.org/10.66104/4eat5r11
Vancouver
Benfrid A, Murawski K, Khatib M, Boukhari A. Numerical Homogenization of Concrete Reinforced with Aluminum Powder Based on the Mori Tanaka Method. Journal International Review of Research Studies. 2026;1(09):1-11. doi:10.66104/4eat5r11
BibTeX
@article{Benfrid2026,
author = {Benfrid, Abdelmoutalib and Murawski, Krzysztof and Khatib, Milad and Boukhari, Ahmed},
title = {Numerical Homogenization of Concrete Reinforced with Aluminum Powder Based on the Mori Tanaka Method},
journal = {Journal International Review of Research Studies},
year = {2026},
volume = {1},
number = {09},
pages = {1--11},
doi = {10.66104/4eat5r11}
}
EUVIMED