Objective Function Design for Traffic Microsimulation Calibration in Smart-City Digital Twins: Evidence from a Detector-Based Study of the Antwerp R1 Weaving Segment
Journal of Urban Development and Smart Cities · 01.12.2025 · 2 · 295-307
DOI: 10.66033/judsc2025-228 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Urban Development and Smart Cities, online erschienen am 01.12.2025. Verfasst von Yan Li und 1 weiteren Autor:innen.
Abstract (Originalsprache)
Traffic microsimulation is central to smart-city transport control because digital twins and decision-support platforms depend on well-calibrated behavioural models before operational strategies are tested in the field. This paper examines how objective function design shapes calibration efficiency and parameter convergence consistency in a detector-based microsimulation setting. The study uses a VISSIM model of a 2.5 km weaving segment on the southbound Antwerp R1 motorway and calibrates 41 driving-behaviour parameters using detector-level speed and headway observations from the morning peak of 10 September 2019. A multifaceted objective function based on the 1-Wasserstein distance is evaluated against the Kolmogorov–Smirnov (K–S) distance and root mean squared relative error (RMSRE), under single-KPI and dual-KPI formulations. Two optimisers are considered: simultaneous perturbation stochastic approximation (SPSA) as the primary high-dimensional method and Bayesian optimisation as an external validation benchmark. In the synthetic experiment, the random-seed noise effect is 1.2%, and the optimisation trajectories approach attainable minima near 1.75% (SPSA) and 1.6% (Bayesian optimisation) when starting from dispersed initial points. In the real-data experiment, the strongest and most balanced behaviour is obtained when the Wasserstein distance is paired with a speed-plus-headway objective. Across the 32 dominant-class parameter instances used for convergence assessment, this setting yields 13 parameters meeting the consistency threshold under SPSA, compared with 5 under the K–S speed-plus-headway formulation. Although speed-only RMSRE also stabilises 13 parameters, it does so under a single-KPI setting that does not preserve balanced performance across KPIs. The results show that, for smart-city traffic digital twins, calibration quality depends not only on the optimiser but on whether the objective function preserves traffic-state heterogeneity and constrains the parameter search with sufficiently rich behavioural information.
Zitieren
APA
Li, Y., & Wie, X. (2025). Objective Function Design for Traffic Microsimulation Calibration in Smart-City Digital Twins: Evidence from a Detector-Based Study of the Antwerp R1 Weaving Segment. Journal of Urban Development and Smart Cities, 2, 295-307. https://doi.org/10.66033/judsc2025-228
Vancouver
Li Y, Wie X. Objective Function Design for Traffic Microsimulation Calibration in Smart-City Digital Twins: Evidence from a Detector-Based Study of the Antwerp R1 Weaving Segment. Journal of Urban Development and Smart Cities. 2025;2:295-307. doi:10.66033/judsc2025-228
BibTeX
@article{Li2025,
author = {Li, Yan and Wie, Xiaong},
title = {Objective Function Design for Traffic Microsimulation Calibration in Smart-City Digital Twins: Evidence from a Detector-Based Study of the Antwerp R1 Weaving Segment},
journal = {Journal of Urban Development and Smart Cities},
year = {2025},
volume = {2},
pages = {295--307},
doi = {10.66033/judsc2025-228}
}
EUVIMED