EUVIMEDEUVIMED entdecken
Crossref

Design and Static Structural Analysis of a Trainer Fighter Aircraft Wing with its Internal Members

G.D. Thomas-Buoro, J.A Ajayi, H.A.

AGE Journal of Science · 15.05.2026 · 1 (2) · 7

DOI: 10.65997/txst6969 ↗

Kurz gefasst

Fachartikel in der Zeitschrift AGE Journal of Science, online erschienen am 15.05.2026. Verfasst von G.D. Thomas-Buoro und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the static structural load analysis of a trainer-fighter aircraft wing modelled under specific design conditions in SOLIDWORKS 2023, to determine the stress and strain values for a single wing generating 23,544 N in normal flight conditions. The limit load (maximum expected operational load) of the wing was taken to be 141,262 N, representing the highest load force anticipated during manoeuvres with a +6 design Factor. The static structural analysis was carried out using ANSYS R2 2023 workbench were various load conditions were applied on the surface of the wing in terms of Force(N). The varying loads spanned from 10,000 N to 140,000 N. Stress, strain, and strain energy calculations were carried out on different load conditions, analysing the behaviour of the wing using Aluminium alloy (2024-T3) and (7075-T6). The plotted results of this research showed that as load values increase on the wing, the stress and strain values also increase. This analysis showed that at 10,000 N, the Fighter aircraft wing will undergo a stress deformation of 71.058Mpa and strain deformation of 0.000692mm/mm, which indicates that these stress and strain conditions are well under the elastic limit of both the Aluminium alloy 2024-T3 and 7075-T6. At 70,000 N, the Fighter aircraft wing undergoes a stress deformation of 316.08MPa and strain deformation of 0.0043687mm/mm, which also indicates that these stress and strain conditions are still under the elastic limit of both the Aluminium alloy 2024-T3 and 7075-T6. But at 140,000 N, the Fighter aircraft wing undergoes a stress deformation of 514.14MPa and strain deformation of 0.0071244mm/mm, which also indicates that these stress and strain conditions are well over the elastic limit of the Aluminium alloy 2024-T3(345Mpa) and Aluminium alloy 7075-T6 (503Mpa). This generally shows that at 140,000 N, the fighter trainer wing will show signs of plastic deformation on the skin and its internal members, as its material the Aluminium alloy 2023-T3 and Aluminium alloy 7075-T6, exceeds its elastic limits of 345Mpa and 503Mpa respectively. This research contributes to the advancement of efficient design and static structural analysis in aerospace wing design for future Trainer Fighter Aircraft.

Zitieren

APA

Thomas-Buoro, G., Ajayi, J., & H.A. (2026). Design and Static Structural Analysis of a Trainer Fighter Aircraft Wing with its Internal Members. AGE Journal of Science, 1(2), 7. https://doi.org/10.65997/txst6969

Vancouver

Thomas-Buoro G, Ajayi J, H.A.. Design and Static Structural Analysis of a Trainer Fighter Aircraft Wing with its Internal Members. AGE Journal of Science. 2026;1(2):7. doi:10.65997/txst6969

BibTeX
@article{ThomasBuoro2026,
  author = {Thomas-Buoro, G.D. and Ajayi, J.A and H.A.},
  title = {Design and Static Structural Analysis of a Trainer Fighter Aircraft Wing with its Internal Members},
  journal = {AGE Journal of Science},
  year = {2026},
  volume = {1},
  number = {2},
  pages = {7},
  doi = {10.65997/txst6969}
}
Kostenlos starten →