EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of the In-Plane Behavior of Gypsum Partition Walls with Flexible Joint Detailing

Taha Yasin ALTIOK, Gökhan GÜNEŞ, Ali DEMİR, Gökhan ALTINTAŞ

Construction Systems & Infrastructure · 23.05.2026 · 2 (1)

DOI: 10.65782/csin.19 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Construction Systems & Infrastructure, online erschienen am 23.05.2026. Verfasst von Taha Yasin ALTIOK und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Partition walls and their derivatives are fundamental structural elements used to separate interior spaces in accordance with architectural requirements. However, these elements are damaged even at low displacement levels under seismic effects, posing a risk to life and property safety. This study aims to experimentally investigate the effects of using flexible joints on the in-plane behavior of gypsum board partition walls. In particular, the contribution of the flexible joint detail to damage development and lateral load-bearing capacity was evaluated. In this context, two gypsum board specimens were produced, one with a flexible joint detail as defined in the Turkish Building Earthquake Code (TBEC-2018), and the other with a traditional (non-flexible joint) design. The experiments were conducted in a 1:1 scale steel frame with 4-point hinges. The specimens were tested under a reversed cyclic lateral loading protocol representing the seismic effect. The experimental results showed that the flexible joint detail delayed damage progression even at high displacement levels and provided more controlled behavior by limiting the in-plane stiffness of the system. The flexible joint specimen exhibited a performance close to that of a frame without walls in terms of lateral load-bearing capacity. This indicates that partition walls can prevent irregular internal force distribution by providing additional stiffness to the load-bearing system that was not considered in the design. The findings show that the use of flexible joints can reduce the risks of soft/weak story and short column formation and prevent negative seismic force effects resulting from the failure to consider partition wall stiffness during the design phase.

Zitieren

APA

ALTIOK, T. Y., GÜNEŞ, G., DEMİR, A., & ALTINTAŞ, G. (2026). Experimental Investigation of the In-Plane Behavior of Gypsum Partition Walls with Flexible Joint Detailing. Construction Systems & Infrastructure, 2(1). https://doi.org/10.65782/csin.19

Vancouver

ALTIOK TY, GÜNEŞ G, DEMİR A, ALTINTAŞ G. Experimental Investigation of the In-Plane Behavior of Gypsum Partition Walls with Flexible Joint Detailing. Construction Systems & Infrastructure. 2026;2(1). doi:10.65782/csin.19

BibTeX
@article{ALTIOK2026,
  author = {ALTIOK, Taha Yasin and GÜNEŞ, Gökhan and DEMİR, Ali and ALTINTAŞ, Gökhan},
  title = {Experimental Investigation of the In-Plane Behavior of Gypsum Partition Walls with Flexible Joint Detailing},
  journal = {Construction Systems & Infrastructure},
  year = {2026},
  volume = {2},
  number = {1},
  doi = {10.65782/csin.19}
}
Kostenlos starten →